Xflow bike carb manifold

[immingham]

Does anybody know who makes manifolds for a mk1 fester, if so what carbs are required?

[Toby]

I've heard people talk about Bogg Brothers for these sorts of things.

 

Don't know them or know if they do what you're after, but they do the bike carb conversion stuff.

[Synergy]

They'll build a manifold to fit bike carbs onto pretty much anything I reckon

 

Been on the go for yeeeeeeeeaaaaaaaaaarrrrrrrrsssssss.

 

http://www.boggbros.co.uk/gallery5.html

[Guest cortinamad-gonetoo]

as above bogg brothers near malton

[Synergy]

I went for R1 carbs for my 2.0 Zetec after quite a bit of research and speaking to Dave (daddy Bogg), apparently they have 40mm chokes which I think would equates to standard 48s in Weber speak I think GSXR 750 carbs have a 38mm choke which might equate to standard Weber 45s I'm still learning about this stuff.

[Copey]

as above, bogg bros and tbh any bike carbs from a bike thats over 750cc will work

 

again, as above

popular ones are GSXR750 carbs and R1 carbs, but R1 carbs are £150

 

i am going bike carbs and i am using GPZ 1000RX carbs

 

you will need the carbs jetted for car use, i phoned Bogg Bros and got quoted £30+VAT to jet them

 

they charge about £150-175 for the manifold, you need a cable kit from them £10 and a choke kit £12, you need a choke as bike carbs wont start without one

[Synergy]

...........but whichever ones you do buy if they are supposed to be fitted with a TPS and you want to utilise it make sure it's not missing because they can be a fortune especially the Yamaha ones

[radar tech]

on my blacktop i am running gsxr 750 carbs with the main jets drilled out to 1.8mm. start and run fine and sound good too

this link may help:http://www.totalvauxhall.co.uk/resources/totalvauxhall/TOV64.tech60697.pdf

[radar tech]

http://www.totalvauxhall.co.uk/resources/totalvauxhall/TOV64.tech60697.pdf

[immingham]

Cheers all i'll give them a bell in the morning

[dawesy1700]

as above, bogg bros and tbh any bike carbs from a bike thats over 750cc will work

 

again, as above

popular ones are GSXR750 carbs and R1 carbs, but R1 carbs are £150

 

i am going bike carbs and i am using GPZ 1000RX carbs

 

you will need the carbs jetted for car use, i phoned Bogg Bros and got quoted £30+VAT to jet them

 

they charge about £150-175 for the manifold, you need a cable kit from them £10 and a choke kit £12, you need a choke as bike carbs wont start without one

 

my 750 ninja carbs wont start with the choke, it just kills the engine, lol, and as for a throttle cable, they use the same cables as mountain bike brake cables from halfords for £1.99, but i aint had a fantastic time with them, the manifolds are good but don't buy the carbs off them, buy your own so you know exactly what bike they're off so you can get parts.

[radar tech]

i sm using my old standard escy throttle cable. just snipped off the carb end and broght a ferral to clamp the cable