Jump to content

Recommended Posts

Posted

Someone who owned my cortina previous to me, has done a bad job of painting the boot black. Looks like the paint is straight on top of the old green, bits are coming off, and it doesnt look like the green was even sanded to help the paint stick. I want all the black off. I have chipped a few bits off with my thumb nail and it comes off with the green looking ok.

 

Any one got an idea how I can get all the black off reasonably quickly but without damaging the green under it?

 

I will strip the boot eventually and get it sprayed, but I just want a short term solution for now. Cos I dont like the black boot and bonnet anyway

 

 

 

boot.jpg

Posted

Try some thinners on it and see what happens. Just try a little bit somewhere that won't show up too much if it goes tits up.

There's a good chance the black is out of a Halfords rattle can and will come straight off.

Posted
Try some thinners on it and see what happens. Just try a little bit somewhere that won't show up too much if it goes tits up.

There's a good chance the black is out of a Halfords rattle can and will come straight off.

 

just what i was gonna say

Guest cortinamad-gonetoo
Posted

thinners will do it but make sure you only do a little bit at a time and wash it off so it doesnt ruin the green paint

Posted
this one I got off my mam is a household one, cleans carpets, steams off wallpaper, my mam used it to do the oven, sounds very different to the one you mentioned Steve!

 

lol, it might work :lol:

 

The type I'm on about is like a pressure washer but uses steam :thumbsup:

Posted

bought a tin of thinners tonight, tried for about 10 mins in one spot on the boot, and it started to come away but only a tiny tiny amount. So using this route is going to take days and days. So I think its time to try the wet and dry

Posted

i'd take a cloth and the thinners to a jetwash (or use a home one) the home ones are the best cause you can adjust the spray to a single point which is really powerful!

 

just coat the bootlid gently in thinners and leave for a minute or two, then attack it with the jetwash as close as you can, see if that works?

 

ive found on bad prep work jetwash does wonders to ripping the paint off ;)

 

and i'd run some 1000grit rather than 2000grit, until you see lots of green, then do the 2000grit, itll take you weeks with 2000 =)

 

then whack some polish on the green and hope for the best =)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...