can someone identify these bits?

[stevepeanut]

not sure wether to put this in the pinto room or in here, cos it will apply to any engine I guess.

 

ok, I got my new sump gasket in the post today, but it also includes all these other bits

 

theres 2 gaskets, each with 3 holes in

something that looks like a white washer

2 black curved bits

and something that looks like 2 little blocks

 

can anyone explain what these are for?

if I swapping the sump only do I need them all? or just the main gasket?

if anyone can figure this out it would be a big help

cheers and heres a pic

[Guest cortinamad-gonetoo]

the white washer looks like a sump bung washer

 

the gaskets with 3 holes in look like fuel pump gasket and spacer and the 2 black curved bits youll maybe need at the sump where the crank ends (not too sure on that one though)

[escort21]

White washer is sump plug and the black things are the front and rear sump to cover gaskets

[stevepeanut]

White washer is sump plug and the black things are the front and rear sump to cover gaskets

 

so do they go inbetween the engine and sump? or do they fit over the outside once the sump is in place

 

also I wonder if one of those 3 hole gaskets fits where the oil pickup pipe bolts in place

[w p e]

the smaller gasket with 3 holes is pick up pipe. the black rubbers go in the

front cover and rear main cap between the block and sump. the 2 little wedge's go either side of the rear main cap but only if your taking the main bearing cap's of if not don't disturb the one's in there already . the bigger gasket with 3 holes is fuel pump the whitr washer is the sump plug washer

[stevepeanut]

the smaller gasket with 3 holes is pick up pipe. the black rubbers go in the

front cover and rear main cap between the block and sump. the 2 little wedge's go either side of the rear main cap but only if your taking the main bearing cap's of if not don't disturb the one's in there already . the bigger gasket with 3 holes is fuel pump the whitr washer is the sump plug washer

 

thanks for that reply mate, now I know what I am doing

[evil knievel]

the smaller gasket with 3 holes is pick up pipe. the black rubbers go in the

front cover and rear main cap between the block and sump. the 2 little wedge's go either side of the rear main cap but only if your taking the main bearing cap's of if not don't disturb the one's in there already . the bigger gasket with 3 holes is fuel pump the whitr washer is the sump plug washer