Jiffer Posted February 8, 2011 Report Posted February 8, 2011 I have now got my mk2 cortina rolling again and turned round to fit the tramp bars these are a single bar one either side, these weld to a reinforceing plate on the chassie rails and then at an angle towards the diff, what I am unssure of is if at the diff/axle end do they need welding on the top or the bottom, do they need to be as level as possible when the car is on the ground or does it not matter? many thanks they are similar to these.
ox Posted February 8, 2011 Report Posted February 8, 2011 most tramp bars weld to top of axel as far asi know
Tom Posted February 8, 2011 Report Posted February 8, 2011 I'd say the bottom mate so long as your axle's lowered on blocks. Have a look on the Milton website as they have a similar kit that welds to the bottom - I think
rallyesport04 Posted February 8, 2011 Report Posted February 8, 2011 ive only ever seen the brackets on the top make sure when you weld them on the full weight of the car is on its wheels otherwise it will cause problems
4-Door Pete Posted February 9, 2011 Report Posted February 9, 2011 I have a similar kit on my Mk1 Cortina and the axle brackets are welded to the top. As far as I know the it doesn't matter if the car is on its wheels when it's welded so long as it on it's is when you fir the bars as one end is adjustable. Mine came from Alachi and Alan dent was most helpful. good luck Pete
escort21 Posted February 9, 2011 Report Posted February 9, 2011 Early 1600es and gts had them as standard and the brackets well on top of the axle, they are quite weak though as i ripped mine off , need the car to have its full weight on the suspension when they are welded on
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now