atomic punk Posted February 27, 2011 Report Posted February 27, 2011 The mrs this afternoon decided it would be a good idea to wash her fiesta... with a scouring pad Can anyone recommend a polish or cutting compound that I can use to polish out the fine scratches that will a) do a reasonable job and not take up too much of the time I would otherwise have been spending on the mk2 thanks in advance
SebringRS Posted February 27, 2011 Report Posted February 27, 2011 Dunno if its the same sort of thing, but when your colour sanding, you use 2000 grit paper then go over with some G3 compound, buffs up the paint after you've used the 2000 grit Although, think it depends how deep the scratches, and how much she's done But give G3 a try, unless anybody else knows a more effective way http://www.hotrod.com/techarticles/body ... index.html
rallyesport04 Posted February 27, 2011 Report Posted February 27, 2011 ive used g3 to bring up paint on 2nd hand plant equipment done a nice job took a bit of effort tho
SebringRS Posted February 27, 2011 Report Posted February 27, 2011 Might be a good investment on an electric polishing mop if she' gunna make it a regular thing Oh, don't forget, when polishing it back up with the G3, keep it well lubricated, water in a spray bottle is the most handy
atomic punk Posted February 27, 2011 Author Report Posted February 27, 2011 Thanks sebring, I'll give that a try but was rather hoping not to have to invest in an electric mop.... I'll certainly be 'advising' next time the bucket and shampoo come out!
SebringRS Posted February 27, 2011 Report Posted February 27, 2011 http://www.tedbartinkerhire.co.uk/MainF ... nding.html number 9
andy a Posted February 27, 2011 Report Posted February 27, 2011 You can G3 it by hand, slower than a mop but will do the job. If you do decide to get a polisher silverline do a 9" with variable speed control and soft start for about 40 quid, damp the pad, put a few spots of compound on and work a small area at a time keeping away from swage lines and edges, keep spraying a bit of water in to keep the paste moving, it avoids heat build up and or grabbing...
zetecmk2 Posted February 28, 2011 Report Posted February 28, 2011 drive it to crawley with a bumper in the boot, we'll sort it...and pay your fuel
atomic punk Posted February 28, 2011 Author Report Posted February 28, 2011 That sir, is an offer that cant be refused - you will have pm shortly
zetecmk2 Posted March 5, 2011 Report Posted March 5, 2011 sorry i wasn't there, but i did get the v8 running.....eventually did they come out?
atomic punk Posted March 6, 2011 Author Report Posted March 6, 2011 Came out really well, well chuffed. Apparently the scratches are deep but since its been done you wouldnt notice them, the bonnets like a mirror! so thanks to Sean! Was that your tina I spotted outside??
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now