chip and mapping for yb?

[TILBROOK]

does any one know were i can get a cosworth yb chipped and mapped local to south london / surrey thanks paul

[PaulMags]

Hartpower engineering not to far from you maybe there in bedford he's a cosworth specialist.Joe you'd need to speak to that is Joe Stevens

[TILBROOK]

got a phone number thanks

[PaulMags]

got a phone number thanks

 

its in work so i will bring it home with me tomoro for you

[4parajon]

Joe Stevens workshop number is 01621744881 altho I'm not sure he gets involved with mapping etc, more of an engine builder.

I use Karl Norris from NMS Motorsport in Derby, I appreciate its not around the corner for you, but I would'nt use anyone else to map my car.

[105Ian]

GSmotosport mapped and built the YB for my Anglia and it goes like a dream and pulls from low revs lag free can not reccomend Joe enough , he will give you honest information and make your YB engine like its meant to , plus they are in Romford in Essex so not to far from you .

 

Have a look on turbosport they are one of the site sponsors and has quite a few of the peoples cars up on there .

[sambo]

Just thought i'd drop in and mention that Joe at Hart Power / bluesprint engines is a diamond. Used to work on F1 engines and always has time for giving advice.

Highly reccomended.

[rallyesport04]

norris motorsport nms or motorsport developments msd chips are both very good a friend had a norris engine an map took it to msd an gained another 40bhp an drove smoother mind you liverpool is a long way they might do a chip off the shelf if you tell them the spec

[PaulMags]

Just thought i'd drop in and mention that Joe at Hart Power / bluesprint engines is a diamond. Used to work on F1 engines and always has time for giving advice.

Highly reccomended.

Just thought i add to this Joe still works on f1 engines and is a very honest guy and knows everything what you want to no about a cossy engine and is very good with his prices when it comes to doing work on them for you.he long studded my block for me and and done other work and was hell of alot cheaper than anyone else.I did question him myself about mapping ect and he is capable of doing it.he also sells alot of parts and second hand ones aswell.

[sambo]

Just thought i'd drop in and mention that Joe at Hart Power / bluesprint engines is a diamond. Used to work on F1 engines and always has time for giving advice.

Highly reccomended.

Just thought i add to this Joe still works on f1 engines and is a very honest guy and knows everything what you want to no about a cossy engine and is very good with his prices when it comes to doing work on them for you.he long studded my block for me and and done other work and was hell of alot cheaper than anyone else.I did question him myself about mapping ect and he is capable of doing it.he also sells alot of parts and second hand ones aswell.

 

Cool, well i have just got running my N/A Cossie built by him and i can say that it is a stonker. It may have 300cc's on top of any other YB i have driven but this engine is an animal.

You could do alot worse than trust him with an engine!

[theloudboy]

The only man i would trust with a turbo YB, would be mark shead at MA developments who built the first cosworth to go over 200mph.

He is in maidenhead, berkshire tel no 07768 356204.

If you have seen any of the cars he has touched there are out of this world.

http://www.madevelopments.dsl.pipex.com/home/index.htm