Jump to content

Recommended Posts

Posted

just wondering what you guys recommend? i was gonna paint them in hammerite smooth.

 

 

but just wondering what the best way to prep them would be. im going over them with a wire brush to remove most the rust, is there a primer anyone would recommend? iv got a tin of zinc182 sitting in my room i did wonder if to put a coat of that on first? or can hammerite be painted onto bare metal?

Posted

One thing I don't like about Smoothrite,apart from the smell,is it's a b*gger to paint over unless with Smoothrite again.

 

Also there's not a great range of colours so in the past I've mixed my own colours using a couple of small tins like black and white to give a nice grey105E_stuff319.jpg and red and yellow for a very nice orange.I've not tried it with other combinations and have only mixed them in equal quantities as that way the colour is easy to duplicate if you run out.

Good luck anyway. :thumbsup:

Posted
read the tin, im sure it says on bare metal but check 1st,i know you should you a primer for ally etc but straight on bare steel

 

 

hammerite do a primer called "no..1 rust beater" in brown or beige. to be honest you dont realy need that on the leaf springs.not unless your parking the car right near the sea :shock: as already said, just a good wire brushing and sanding will do . dust off and 2 coats of hammerite will be good. (painter and decorator :wink: )

Posted

awesome cheers! yeah im not too fussed about being able to paint over it, i did think that there isn't much colours to choose from, lucky i only wanted black :) i painted the springs last night so ill have a look today hopefully they'll look alright haha.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...