Danish Posted August 20, 2014 Report Posted August 20, 2014 Does anyone here have any experience with sand-casting aluminium? After mentioning it on OSF a week or two ago, I've been looking at progressing my super-charger project. The blower is from an MR2 and comes with cast ally manifolds to suit the Toyota. But the whole thing is too large to fit a Cortina engine bay. So, I have this plan to chop off the bits I need from the manifolds, and re-work them into a better shape using epoxy and car body filler, and use that as a mould for sand-casting new manifolds. We have a local sand casting place and they're up for doing the work. But, I haven't done this before, are there any problems to look out for?
katana Posted August 20, 2014 Report Posted August 20, 2014 Solid casings are a piece of piss to do - two half moulds, put them together and cast. Anything tubular is a PITA as not only do you have the two halves but also the contoured / round internal plug to form the tube. Surely a bit of fabrication would be easier to join one bit to the other?
Danish Posted August 21, 2014 Author Report Posted August 21, 2014 Surely a bit of fabrication would be easier to join one bit to the other? It might be, though I can't weld alloy so it would still need to be done by someone else. Here are a few sketches of ideas - the top right is do-able with fabrication and the original set-up - it's all wrong for a Cortina engine bay & Pinto
deltamal Posted August 21, 2014 Report Posted August 21, 2014 May be easier and cheaper to go the fabricated/ tig welded route, should be someone local who can tig weld alloy, are you looking at a one off or lots to sell?
Danish Posted August 21, 2014 Author Report Posted August 21, 2014 Just one An alternative is to cut out new flanges from steel plate and use steel pipe - then I can MIG it myself.
DT36 Posted August 21, 2014 Report Posted August 21, 2014 Danish, there used to be a guy on Ebay that did stamping for strut plates. He used to live towards the top end of Merthyr. I took my plates to his house for a MK1 Escort and was impressed with his house garage set up. He was also restoring a MK2 Escort shell and told me that he was an industrial welder (all types) by trade. If ever I wanted any work done, he said to give him a shout. I had his number off him back last year, so might be worth seeing if its still good. Sent it to you via pm. 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now