Jump to content

Recommended Posts

Posted

Mr. Retro, I have done a quick search and found a couple of websites. There is one that sells the Weber Alpha engine management kits, and another that sells performance Pinto's and parts. I won't quote from these sites because to be honest, I don't really know what I am looking at, but I am seeing prices of £3000 - £5000 for a Pinto which runs on carbs *EDIT* Sorry, that looks like it's just the engine!!! The full Weber Alpha kit from memory was about £1200. If you don't mind picking out what is what, I would appreciate it. :wink:

 

BTW, just looking through them again, these are just engine spec's and prices for A Pinto - just the Pinto. :shock:

Here are the links:

 

http://www.pumaracing.co.uk/PINTO.htm Info here - no prices!

 

http://www.northamptonmotorsport.com/default.asp?id=41

 

http://www.mspd-engines.co.uk/pintoengines-complete.htm

 

http://www.mspd-engines.co.uk/pinto-parts.htm

 

http://www.mspd-engines.co.uk/pintoheads-modified.htm

Posted

Mmm they dont list a 2000cc engine ??

 

Oh and gaz i forgot to reply to this ............

 

I have upmost respect for retromotorsport

 

no you dont... you hate me, i keep cutting big holes in lovely escorts :D

 

But, on the same hand you wouldnt belive what Gaz is like away from a keyboards and pinto debates... helpfull and full of praise for whatever people are driving or have

Posted

But, on the same hand you wouldnt belive what Gaz is like away from a keyboards and pinto debates... helpfull and full of praise for whatever people are driving or have

 

Your right, I would'nt :lol:

Guest MK1gaz
Posted
But Gaz.... you still havnt priced up a good pinto or Na YB yet... you've thrown a few prices around but with no proof.

Well as i've already said it depends HOW and WHO does it . A 230 bhp atmo cossie YB engine isn't much more expensive than a hot 180-200 bhp pinto to build because apart from one extra cam + vernier , extra head porting and a new flywheel ( if using a type 9 or original 4 speed gearbox ) the costs are the same . Don't forget a YB has a STEEL crank and rods as STANDARD and bolts into an escort using CHEAP standard ford parts . That's the part that REALLY sticks 2 fingers up to the modern engines , especially duratec installations :shock: . I've said that to get a standard duratec and get it driving up the street will cost £5000 using new parts , which it will and it will be slow . I've said that YOUR 280 bhp duratec install will be £10,000 , which it will but that one will be fast . Mind you ANY £10,000 4 pot 2 litre WILL be AS fast anyway so nothing gained there then !!!!!!! :mrgreen: Also NEVER believe higher "peak" bhp numbers on a rolling road will mean that one engines going to out perform another engine with say 15 bhp less in a race , as the engine with the biggest power band will normally win . A 180 bhp pinto WILL snort it's way past a 195 bhp duratec in a race off the traffic lights everytime , and that's a 100% dead cert . :ykt::thumbsup:
Posted
Gaz out of interest what sort of power did your pinto make on the rollers...

 

Depends on which rollers :lol::lol::lol:

 

what you mean :roll:

Posted
Gaz out of interest what sort of power did your pinto make on the rollers...

 

Depends on which rollers :lol::lol::lol:

 

what you mean :roll:

 

Well there is the conspiracy threory . . . .

That you dont get the real reading on some rollers but i think that has been addressed :P

Guest MK1gaz
Posted
Gaz out of interest what sort of power did your pinto make on the rollers...
Stroked crank 2.1 Harris pinto on 45's and points power readings = Southern carbs and injection 154bhp out of tune running like shit , after tune up , new plugs + points etc 184 bhp :mrgreen: . At sanspeed after the usual points and plug change etc 185 bhp :mrgreen: ,. At power engineering where they had NO oldskool parts :sad: so no points or plugs 174 bhp :mrgreen: . At track n road where they adjusted the timing and carb settings so it ran on for 2 mins after i swithched the engine off :roll: and with a throttle cable slipping into the bulkhead 156 bhp :twisted: .This was a magazine dyno day so no time for actual plugs , points + throttle cable replacement etc so i'll let them off this time :wink:
Posted
dont you guys remember the long running thread, similar to this one about whos rollers were better than others :lol::lol:

 

where was that then and who`s was the best then?

Posted
Gaz out of interest what sort of power did your pinto make on the rollers...
Stroked crank 2.1 Harris pinto on 45's and points power readings = Southern carbs and injection 154bhp out of tune running like shit , after tune up , new plugs + points etc 184 bhp :mrgreen: . At sanspeed after the usual points and plug change etc 185 bhp :mrgreen: ,. At power engineering where they had NO oldskool parts :sad: so no points or plugs 174 bhp :mrgreen: . At track n road where they adjusted the timing and carb settings so it ran on for 2 mins after i swithched the engine off :roll: and with a throttle cable slipping into the bulkhead 156 bhp :twisted: .This was a magazine dyno day so no time for actual plugs , points + throttle cable replacement etc so i'll let them off this time :wink:

 

sanspeed is where mine is off to soon :thumbsup:

Guest MK1gaz
Posted

Yes posse :D Sanspeed is great for all the oldskool engine posse after a tune up and check over . Peter Sansom the dyno operator is a legend and a top geezer :worship: . He was recommend to me by Ron Harris and he foooooking knows !!!!!!! :worship: Southern carbs in Wimbledon are just as good as well for oldskool carbed engines :ykt::thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...