Essexboy

These are the wheels, thanks Vista was easier than i thought

As the title, 2 x 15" 7j compomotive FH 2 piece split rims with brand new 195 45 15 tyres 2 x 15" 8j?? Compomotive FH 3 piece split rims with used but good 195 50 15 tyres Not 100% sure on the width of the rears but were remade as a 3 piece to widen them. Centers are currently painted orange but wouldnt cost a lot to have them re done a different colour. Dont know how to add pics on here so message me and il send you some pics buy whatsapp or email Looking for £650 collection only from Essex 07834999161 Thanks Dan

Would be best for me to sell in one lot rather than split it im affraid

Forgot to mention type 9 gearbox comes with it, decided to drop price to £3000 all in to fund another project

As topic, 2.1 pinto for sale spec as follows: WPE big valve head HT1 cam with HD kent rockers Isky valve springs Wossner forged pistons machined to suit engine spec - 11.4-1 comp ratio (approx) Cosworth YB rods Stock crank Steel lightweight flywheel Standard clutch - will need uprating as it slips slightly Twin 45 webber carbs brand new Bestek electronic ignition Ashley big bore manifold Looking for £3500 only covered approx 300miles I have dyno sheet and a video on dyno. Engine runs lumpy around town due to the cam thats in it but when cam comes in it pulls like a train - if its going to be used all the time to pop tescos etc might want to chuck a milder cam in. Engine is still in the car so can be heard running etc Based in burnham on crouch, essex 07834999161 Dan

Diff is sold

It's original cossy 205 block and yes I believe it's standard bore

Forgot to mention engine would also make for a very responsive high torque turbo engine with low boost if that's what you want.

Located in Wickford Can deliver locally (try me) Thanks Dan

Reluctantly please see items below for sale, Atmo YB cosworth engine - built by WPE Re profiled WPE spec cams Head work by Wayne at WPE Cossy rods Cossy crank Flat top Pistons Lightweight flywheel 5 paddle clutch Unsure of the potential BHP figure as it's not been set up on the rollers yet, does run and can be heard running before removal from the car £4000 New twin 48 weber carbs on YB manifold £750 105 speed stainless steel exhaust manifold £300 bestek electronic ignition £250 Will sell all the above as a package for £5200 Tran x 18t LSD with 3.5 ratio for english axle (escort flange) £500 T5 cosworth gearbox with B&M quick shifter £500

Yeah be good to see you at shakey, il be there! Launching at about 4500rpm Fab work was a trial really but works really well, running anglia English axle, tran x 18t shafts and a 3.5 tran x slipper, short home made ladder bars mounted in original front spring mounts, coil overs 180lb springs

Thanks Luke! Yeah it defo does the job! Pretty easy to do as well mate! Just measure everything twice haha

How did you get on mate? Manage a few runs with new setup? I ran myn with the slicks got a 1.66 60ft engine had probs tho and wouldn't rev passed 5k so ran only in the 12's but very happy with how it was hooking up

They are the a048 175 50 13, 3.9 diff, crossed the line on the limiter in 5th! Changed the set-up now tho, running 550mm slicks with a 3.5 diff, was really down on power due to head gasket ( at retro show)! But ran a 12.5 at 103mph changing gear at about 4500rpm due to big misfires, got the 60ft down to 1.66 tho! Waiting for a dyno set-up then back out for some mid 11's hopefully

Managed an 11.9 @ 115mph with a 1.89 60ft on street tyres slicks to put on this weekend at Retro Show with longer ratio diff!

hope you get it sorted mate! im trying to get myn back on the road (road legal) and im sure the insurance is the bit that's going to be the hardest! yb turbo Anglia @ 26 years old? going to be a stinger

would have to be one of them T5 5.0 Pro shifters

Whole weekend was awesome! I would have to say the getting in the 11.s done it for me! never expected that! and didn't break the car doing it!

Stage 2 green injector spec, nothing special but it certainly does the job! Got loads of pics on my Retards Club (Dan Snook) don't know how to upload into here lol Wayne not been able to try it out but I'm sure it's done the trick I'm trying to blag a day off work (hopefully Friday) to come and have a play on your Dyno lol will let you know tomorrow if that's ok?

That will be me yeah 13.4 on low boost, got it sorted now! More to come at Classic Ford Show!

I bought one from Burtons for my 105e! £200 good fit but there was somthing wrong with the pedal where it meets the master cylinder which was locking the brakes on! thanks to Wayne its all good now! got the grinder out i believe

Happy Birthday mate!! I have a Jagermeister with ya when i see you next

happy birthday dude!! hope you had fun!

i blew it up on purpose! gives me the excuss to get a better xflow!! cars all good tho! Took the engine out the other day you should see the state of the inside of it! pushrods wrapped round crank, cam had snapped into 4 bits, followers have been mashed! although the crank, rods, and pistons were all intact