I need a wheel with a 25mm offset

[borneo]

Pickin up some new wheels at the weekend but I need a spare to go with them so I can sell my brooklands wheels as a complete set. Anyone got a spare or know where I might find one. Must be 25mm offset as I'll be running spacers and long studs. Is this a standard offset for any fords?

[andrewg1323]

Escort coswroths et25

I THink in general the pug/ford multifits come in 25 as thats a bit of a cpompramise between the two

[V8ian]

Cosworth Seirra must be around that dimension, , So a standard sierra or mondeo may well fit

[Davecara]

Sierra cossie is et38 or thereabouts.

As said the Escort Cos is et25 and most pugs are et15, bar the 206 and the newer ones. They are et25.

[borneo]

My housemate has a 306 but the wheel locates on the hub centre and not the studs (hubcentric?). Is this the same with the cossie?

[Davecara]

All wheels should locate around the hub.

Fords have a backbore of 63.4mm and you can buy little plastic spigot rings to get a pug wheel (or whatever else fits) down to that size

Usually about £2.50 each for Motorworld or Halfrauds

[borneo]

Cheers. I've been doing my research on hubcentric vs lugcentric setups and as you said, most cars should be hubcentric. Looks like I'm gonna have to get a cossie spare + hubcentric spacers are gonna cost me about £100 extra but hey it's gotta be done properly.

[Davecara]

I've got a set of spacers that my G/F was using on a Pug 206 to fit ford wheels, They're about an inch wide iirc. They any good to you?