Jump to content

Recommended Posts

Posted
For a xflow....Burtons had 8 in stock....i bought 4 so get in quick if you want some :wink: ....i've waited 2 years for mine...seriously :roll:

 

I've heard AE have stopped making these, is this true ?

 

I have also heard of other people having trouble getting hold of these.

Posted

Well they are MASSIVELY back ordered mate...dunno if they stopped making them...assume they have but the're rocking horse shit+hens teeth rare wrapped up in one!! :roll: ...my engine build can now continue!! :thumbsup:....+60s are out of stock as well :roll:

Posted

Click the ebay link and look at the pic, you'll see cut outs in the side of the piston. Hope fully yours haven't got these, just a small slot behind the oil ring. This makes them much stronger.

 

The old ones look like a very rough casting inside the new ones look much cleaner. The new design are a few grams lighter but still fooking heavy :lol:

Posted
Click the ebay link and look at the pic, you'll see cut outs in the side of the piston. Hope fully yours haven't got these, just a small slot behind the oil ring. This makes them much stronger.

 

The old ones look like a very rough casting inside the new ones look much cleaner. The new design are a few grams lighter but still fooking heavy :lol:

 

Yep, my Pre-Crossflow +90's are the same. You can't over work these pistons, due to the slots, only a small part of the piston crown is attatched to the rest.

 

I am not sure if it's the new AE's, but I know of a new aftermarket piston that has a series of holes drilled out behind the bottom piston ring. This makes it stronger, but it also lets the oil through onto the bore :wink:

Posted
Click the ebay link and look at the pic, you'll see cut outs in the side of the piston. Hope fully yours haven't got these, just a small slot behind the oil ring. This makes them much stronger.

 

The old ones look like a very rough casting inside the new ones look much cleaner. The new design are a few grams lighter but still fooking heavy :lol:

 

Yep, my Pre-Crossflow +90's are the same. You can't over work these pistons, due to the slots, only a small part of the piston crown is attatched to the rest.

 

I am not sure if it's the new AE's, but I know of a new aftermarket piston that has a series of holes drilled out behind the bottom piston ring. This makes it stronger, but it also lets the oil through onto the bore :wink:

 

They are good enough for 8500 rpm and 13 second 1/4's :lol::lol::lol:

 

But yes there's not a lot holding the top of the piston to the bottom :lol:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...