BIG G Posted October 29, 2006 Report Posted October 29, 2006 Ive spoken to big baz about fitting this to the mk2 but just to make sure. Can i fit one with the standard cross member as i dont want to replace my teeth as with a wccm every drive. Whats the best company to buy from (ashley/peter loyd) etc im also going to make my own exhaust right hand exit 2.25 or 2.5 not yet made mind up any ideas or help greatfully received.
Fiesta Steve Posted October 29, 2006 Report Posted October 29, 2006 2.25" will be big enough unless you have big hp engine. 2.5" will be louder than 2.25"
tim Posted October 29, 2006 Report Posted October 29, 2006 i thnk u can fit with a standard x member but might need to mod the x member slighty for clearane
samurai Posted October 29, 2006 Report Posted October 29, 2006 The 2.5 inch system is not legal for the road because its over 105bd!! I have one opps
Fiesta Steve Posted October 29, 2006 Report Posted October 29, 2006 The 2.5 inch system is not legal for the road because its over 105bd!! I have one opps You can silence it with boxs to get it below 105db
samurai Posted October 29, 2006 Report Posted October 29, 2006 I have the single box one he he cant wait to start it for the first time next weekend
Fiesta Steve Posted October 29, 2006 Report Posted October 29, 2006 I have 2.5" with single box, its loud
Baz. Posted October 29, 2006 Report Posted October 29, 2006 the problem is the clearance between the manifold and the RS rubber engine mount, it is so close it just melts the rubber, i now ive been there and done it twice!! and before you all say heat paint, exhaust wrap etc it dont work i tried it If you want to use a group 2 Ashley 2 1/4 , then its WCCM ime afraid! Only other option is build your own manifold so it clears
BIG G Posted October 29, 2006 Author Report Posted October 29, 2006 Deffo not getting a wccm deffo deffo deffo. ashley or peter loyd......
samurai Posted October 29, 2006 Report Posted October 29, 2006 Whats the idea of a 3 piece anyway? ive never seen one so im guessing you have to weld 3 parts togther or something or is it anyready done? Peter loyd is like £95 right? its the cheapest ive seen any good tho?
Col-ashtonmobile Posted October 29, 2006 Report Posted October 29, 2006 Whats the idea of a 3 piece anyway? ive never seen one so im guessing you have to weld 3 parts togther or something or is it anyready done? Peter loyd is like £95 right? its the cheapest ive seen any good tho? no mate 2 pieces bolt to the head and 1 piece joins them together =3 pieces
samurai Posted October 30, 2006 Report Posted October 30, 2006 So no welding at all? not even at the bottom bit?
BIG G Posted October 31, 2006 Author Report Posted October 31, 2006 any one whos got one what make is it and what was it like to fit..... as going for it
tim Posted October 31, 2006 Report Posted October 31, 2006 there a few people with them on http://bbs.rallyesportescorts.co.uk/ MKII Rallye Sport Escorts - Powered by vBulletin
Col-ashtonmobile Posted October 31, 2006 Report Posted October 31, 2006 west wales rally spares do them , but they are well close to the engine mounting with a standard xmember , make sure you get the right assembly clamps as well , you need the ones with the nut & bolt , hope this helps
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now