Jump to content

Recommended Posts

Posted

hello all

what size wheels and off set could i fit to a mk1 escort bubble arched

with a standerd 52 inch atlas axle

pics would be good if you have any :thumbsup:

Posted

I dont think there is an answer to that, very much depends on how the arches were put on and what arches were used

Posted

Hi mate, i'm afraid your quite limited here. That bloody axle is so long!

 

I have 8x16's on mine but the offset is ET27 on the rear.

 

I need to get my axle shortened one day, i wonder if Tom at Fostek will do a group discount?........

 

If you stick to 13's i think you can get 8's in there ok? :thumbsup:

 

Just noticed.... we had a chat a while back about this!

Posted

yeah we chatted a few weeks back about it

 

would be nice if we could get a group discount

 

as i got quoted about 700 quid i think to shorten the axle and half shafts :(

Posted

Gartrac charge about £150 to shorten the axle, standard shafts being shortened isnt a very good idea, my brother done that once and they lasted about 2 hours :lol: The he put 2 piece shafts in :thumbsup:

Posted
Gartrac charge about £150 to shorten the axle, standard shafts being shortened isnt a very good idea, my brother done that once and they lasted about 2 hours :lol: The he put 2 piece shafts in :thumbsup:

 

Yeah, but we arent running 400 BHP!!!

Posted

150 quid sounds to cheap

and its no were near the quote i got from them more like 6 to 700 quid

that was for axle and half shafts

 

if i can get 8s under there with a nice dish that would do me

but looks like its got to be shortened then fit 9s

Posted
Gartrac charge about £150 to shorten the axle, standard shafts being shortened isnt a very good idea, my brother done that once and they lasted about 2 hours :lol: The he put 2 piece shafts in :thumbsup:

 

Yeah, but we arent running 400 BHP!!!

 

You have a point, he only went sideways twice :lol:

Posted
150 quid sounds to cheap

and its no were near the quote i got from them more like 6 to 700 quid

that was for axle and half shafts

 

if i can get 8s under there with a nice dish that would do me

but looks like its got to be shortened then fit 9s

 

Dont quote me on that, but maybe worth ringing Gartrac 01428682263 and speaking to Dave and ask him. :thumbsup:

Posted

just rang that number spoke to dave

he said 125 quid to shorten the axle

but he says the half shafts would be no good shortened

and would need to look on the quife site and find some group 1 half shafts

 

all sounds a bit complicated now

Posted

just found this on there site

is an atlas 16 spline or 18

and is it best to go for group 1 or group 4 :(

 

just gets worse lol

IM THINKING ITS THE 1 IVE PUT IN RED BUT NOT SURE

its saying the group 1 Flange is used to retain the original bearing. When fitting the latest Group 1 flange, the retaining plate bore requires extra machining.

 

but on the group 4 it dosnt mention any thing about machining

 

 

Quaife Atlas Group 4 half shaft with 18T spline is two-piece, with separate shaft and flange.

Manufacturer: FORD

Product Code: F1A2-39 Order Now

More Info

Price: £90.00

 

Quaife Atlas Group 4 half shaft heavy duty with 18T spline is two-piece, with separate shaft and flange.

Manufacturer: FORD

Product Code: F1A2-66 Order Now

More Info

Price: £114.00

 

Quaife Atlas Group 1 half shaft with 16T spline is two-piece, with separate shaft and flange.

Manufacturer: FORD

Product Code: D1T2-21 Order Now

More Info

Price: £103.00

 

Quaife Atlas Group 1 half shaft with 18T spline is two-piece, with separate shaft and flange.

Manufacturer: FORD

Product Code: D1T2-14 Order Now

More Info

Price: £103.00

 

Quaife Atlas Group 1 half shaft heavy duty with 16T spline is two-piece, with separate shaft and flange.

Manufacturer: FORD

Product Code: D1T2-30 Order Now

More Info

Price: £125.00

 

Quaife Atlas Group 1 half shaft heavy duty with 18T spline is two-piece, with separate shaft and flange.

Manufacturer: FORD

Product Code: D1T2-29

 

 

http://www.quaife.co.uk/product_search. ... ring=shaft

Posted

I spoke to Tom at Fostek a little while back and he said there wont be any probs running the shortened atlas shafts?

 

N/A power up to around 250 BHP should be alright surely??

Posted

:x:?:?:?:x

 

Confuzzling aint it!!???

 

I dont even know if i am gonna get my 10x15's to fit on the front yet alone the back!!

Posted

Grp1 shafts will do the job, use standard capri wheel bearings with them, some new wheel studs and bobs your uncle :thumbsup:

The grp4 kit has a tendancy to leak, my brother has them on his car, as they were the only thing available years ago from quaife.

You can buy the grp 1 shafts from Gartrac too, they are on their site.

You can use the 16 tooth shafts with a standard capri lsd. Or 18 tooth (ZF type) with modded side gears and modded diff unit.

 

So basically you need the following items.

 

Grp 1 shafts and flanges (two of each) halfshaft nuts x2.

Two new wheel bearing kits for a capri.

And thats about it, they sometimes come with about 4" of spline of the shafts, these can be machined down or cut with a thin 1mm cutting disc to the required length of your axle. So axle shortening is £125 then around £350 for the shafts and bearings. :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...