Jump to content

Recommended Posts

Posted

Hi,

 

How do i wire up an electric fan so it comes on automatically when the engines up to temperature? Or is it better to just have it on a manual switch?

Also, whats this bit on the back of a 6 dial dash?

 

e710_1.jpg

 

And what does this do and how does it work? The wire just passes straight through it?

Copyofe710_1.jpg

 

Thanks

  • Admin
Posted

To wire your fan so that it's temperature controlled you need a thermostatically operated switch in your coolant system. Some go into the rad, but after market kits from the like of Kenlowe will include a phial or bulb that goes into one of the radiator supply / return pipes. Many people have a thermostatic switch with a manual one linked across its terminals in case it fails.

 

The 1st picture is the voltage regulator for the instrument cluster, the 2nd is the inductive pick up for the rev counter.

 

Hope that helps.

Posted

The second photo is pulse wire for your rev counter, connect a piece of two core cable to these wires and then disconnect the neg side of the coil and put one of your new wires to the neg and the other to the wire that you took off the coil, hope this makes sense its quite hard to explain :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...