Jump to content

Recommended Posts

Posted

hi just bought these but got to colect them yet but are these original 6x13 steels? any help wanted/needed and other pics.thanks

 

59e8_11.jpg

 

54de_11.jpg

Posted

The only way to really check is pop a tire off and measure the distance of the inside edge of the rim, thats the only way to be sure, other than that if you look at the hub there may be a stamping that will tell you the size, but as these rims can easily be 30 years old there may be a lot of paint on them,

It may be possible to check the size by cutting 2 pieces of 2x1 so they just fit inside the rim lip, put one piece in each side of the rim and pass a cable tie or two around the pieces of wood holding them together, this will enable you to measure the two faces of the rim with the tire on, I would think if they are 6s the distance between the two faces will be around 6.2 and 6.3"taking into account the thickness of metal of the rims, anything below 6.1" they are not 6" but 5.5s.

Posted

The only pic's could find of my lotus steels.(mine are deffo 5.1/2 j coz its stamped on the wheel)

Photobucket

 

 

The ones your've posted up look like propper lotus steels and should be 5.1/2j , but i think a small number of 6j were made but there quite rare .I dont think you will know for sure till you take a tyre off to see the stamp :wink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...