Jump to content

Recommended Posts

Posted

im totally p!ssed off now, as most of you know i bought a 2.0 pinto engine to replace the 1600 in my mk1 capri, ive been stripping the 2.0 motor slowly and refurbing the parts as i took them off, polished all the alloy, painted camcover and all the bits n bobs, spent ages on it already, took the head off last night to find damage to 1 piston and bore, its just stopped me in my tracks, i cant find anyone locally that can say either 'it needs a rebore' or ' thats ok , just get it honed and all will be ok',

im actually thinking now just to bung the twin weber on my 1600 and all the parts ive refurbed and call it a day.

if i do go for a rebore and new pistons whats i gonna cost me? approximately?

  • Admin
Posted

Sorry to hear that mate, we all have set backs with these kind of things but I agree it's pretty disheartening.

 

The last classic car I bought I thought I'd scored a bargain, it looked nice and ran well needing a minor tune up. The engine went wrong within a few days and the more that it came apart the worse it got. Being rare and complex it's taken 2 1/2 years and about £5k (on the engine alone as some of the parts have to be made to order) to get running right.

Posted

Absolutely!! Don't loose heart. :thumbsup:

 

This is an opportunity!!

 

You can now build the engine you've always wanted!!

 

Or one just a little under that spec and in budget!! :mrgreen:

Posted

dont get disheartend it will all be alright, at a rough estimate (if it needs a rebore and new pistons) your looking at about £100 for the rebore and about £30 per piston but look arround for pistons as some places do the a lot cheaper try bradford grinders there normally pretty cheap

Posted

keep going with it mate! certainly worth it. Im dreading my XE strip down, but rather do it then problems later, at least you will be confident of having a stronger/better engine in the end :thumbsup:

Posted

yeah i know youre right so im just gonna take my time and buy the parts when i can afford to, il look for 2.8i pistons 1st then get the rebore done, il reshell it too and maybe think about a bigger cam and 4-1 manifold when iv got the engine rebuilt, if i take my time and head for early next year i should be ok.

Posted
yeah i know youre right so im just gonna take my time and buy the parts when i can afford to, il look for 2.8i pistons 1st then get the rebore done, il reshell it too and maybe think about a bigger cam and 4-1 manifold when iv got the engine rebuilt, if i take my time and head for early next year i should be ok.

 

:ykt::thumbsup:

Posted

Our hobby can be a money pit, however seems as though youve bitten the bullet and given it a damn good try. I always think about the fella's who have problems like ground up builds to contend with, then my issues dont seem as bad...... :thumbsup:

Posted

what gets me is our cars look great and run well enough but we still chuck shedloads of money at them!

i was quite happy with the 1600's performance till i got on this forum so its youre fault i want more power so i think you lot should pay :mrgreen:

Posted
what gets me is our cars look great and run well enough but we still chuck shedloads of money at them!

i was quite happy with the 1600's performance till i got on this forum so its youre fault i want more power so i think you lot should pay :mrgreen:

 

cheques in the post :lol:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...