Jump to content

Recommended Posts

Posted

Right, iv not even looked into this as i havn't even looked into this as i havn't had the escort out since it happened

 

drove the escort on the 500 mile sound trip the other weekend, not a problem. Pulled into the petrol station about 5miles from home, filled up, and tried to drive off. Moved about an inch then stopped. Like id just driven into a brick wall. Put it in reverse, drove back a few feet and then went forward fine.

 

Got home, emptied the boot (took loads of weight out) then tried to reverse and the same thing. Tried to push the car through it and my mother said it sounded like the same sort of noise when the sill grinds on a ridge on the street (sill wasn't grinding though) moved it forward a bit and it worked fine in reverse then.

 

anybody any ideas what this could be.

 

I dont think its too much weight over the back end although im not ignoring the idea. Surely if it was this then wouldn't it hit the bump stops rather than the tyres rubbing on the arches. The car hasn't been lowered but is on stock single leafs that look a little tired to me.

 

Why would it only do this in one direction and work fine the other?

 

cheers Mark.

Posted

i had an astra van that used to do that on cold wet mornings! a bit of reverse used to cure it. prob need to strip the drums down and give them a good clean. seems odd tho esp afetr such a long journer where they would have dried out and presumably freed right off.

Posted

Happened with me in an old morris when bits of the diff sheared off inside the cover. Locked going forwards and wouldnt move, then backed up a bit and it was fine.

 

Diff went a few miles after that. Just something to be aware of.

Posted
Happened with me in an old morris when bits of the diff sheared off inside the cover. Locked going forwards and wouldnt move, then backed up a bit and it was fine.

 

Diff went a few miles after that. Just something to be aware of.

 

dont say that lol.... i had a diff expolde in that casing not so long back... i scooped all the bits out with my hands... fairly certain i didnt miss any, al least i hope not :shock:

Posted

sounds like a bit of the old diffs still floating around in the casing :(

 

but whilst its in bits, check the brakes over... :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...