R1.Andy Posted June 21, 2009 Report Posted June 21, 2009 i think im gonna need another engine built who would you use.. and how much option 1 iv got a spare block crank head or option 2 rebuild mine its a 1700 x flow but somin aint right im after 17 again usable road but a bit lairy not mental un drivable give us some feed back please last one cost a fookin fortune only lasted 700 miles
dannysmk1 Posted June 21, 2009 Report Posted June 21, 2009 i think im gonna need another engine builtwho would you use.. and how much option 1 iv got a spare block crank head or option 2 rebuild mine its a 1700 x flow but somin aint right im after 17 again usable road but a bit lairy not mental un drivable give us some feed back please last one cost a fookin fortune only lasted 700 miles engine only lasted 700 miles i would use w.p.e
marky4 Posted June 21, 2009 Report Posted June 21, 2009 there is lots of good engine builders about, depends where you live, i would use colin ashton
petrolhead Posted June 21, 2009 Report Posted June 21, 2009 See engine builders part on this site, Vulcan did mine and I couldn't recommend him enough
OldskoolSue Posted June 21, 2009 Report Posted June 21, 2009 I too would very highly recommend Ashton Mobile
R1.Andy Posted June 21, 2009 Author Report Posted June 21, 2009 iv stripped it out the pump has chewed itself up..looks like its shat itself and gave up..there is some orrible metal in the filter and pump.but its most likely from the pump itself.. the sump oil aint to bad little bit metalic silver looking but no worse than 1st oil change..so im hoping a new pump will give me a better idea of weather engine is damaged.. now it cooled down it turn freely im thinking it got a bit to hot and didnt like it..just hope the shells aint picked up note to self always take notice of flashing red lights and lack of movement on oil guage needles
Twinkle Posted June 22, 2009 Report Posted June 22, 2009 colin ashton would be my choice, did my lotus twin cam and was a belter, gonna be getting him to do my 2.1 bottom end in the near future
Admin Mk2Jo Posted June 22, 2009 Admin Report Posted June 22, 2009 I have an Ashton engine too and so can personally recommend his excellent work Call Colin on 0208 669 6092 Other options are: Vulcan - call Steve on 0208 579 3202 - superb reputation W.P.E. - call Wayne or Kev on 07778 202 867 - renowned for their work or H.P.E. - call Jeff on 07958 725 432 - needs no explanation
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now