single carb and manifold info

[d8vyr]

i`m looking for a bit more go for my 16 x/f but don`t want to go down the twin carb route so was looking for idea`s on a single carb set up.. what can you guys suggest cheers davy

[Fiesta Steve]

Single 48

[morcheen]

this is what you want

[over_head_cam]

Side-draught on a Lynx FTW

[Jiffer]

looks cool, but whats a lynx?

[over_head_cam]

Lynx made 'crossover' manifolds for single side-draught carbs

 

[5hane]

 

 

good old 38

 

or a modified 32/36

[Fiesta Steve]

I like the old 32/36, as said above there are a few mods you can do to improve them

[Copey]

I like the old 32/36, as said above there are a few mods you can do to improve them

 

agreed, i have been reading up and a moded 32/36 is miles better than a 38DGAS

 

few simple mods, bore out chambers and remove the 2nd choke, leave primary in for cold starts

 

if youre on turbo sport there is a long detailed thread about it

[5hane]

I like the old 32/36, as said above there are a few mods you can do to improve them

 

agreed, i have been reading up and a moded 32/36 is miles better than a 38DGAS

 

few simple mods, bore out chambers and remove the 2nd choke, leave primary in for cold starts

 

if youre on turbo sport there is a long detailed thread about it

 

Ill upload some pic's of one i started (on mates comp)

 

I bored the bores from (iirc) 25 and 26 mm to 28/29 iirc, ive also filed / knife edged the venturi (think its venturi) and generally polished everything, still got to make a trumpet, and smooth th square bits

 

did it about a year ago, and just havent got round to rebuilding / finishing it.. but ive got some before and after pic's the bores are HUGE compared to standard

[5hane]

one pic of the bore