retrorigg Posted March 15, 2010 Report Posted March 15, 2010 stripped my 1600 x flow today ready to paint, does this look a standard head valves/ports ? really cant decide what colour to paint the engine, thinking black , what do you think? has anyone used silver smoothrite on there water pump/timing chain cover or does it look cheap, reason im askin is i dont wanna disturb it by takin it of to polish it so was just gonna try some silver paint !!!!
Guest cortinamad-gonetoo Posted March 15, 2010 Report Posted March 15, 2010 it looks pretty standard to me though the gap between the inlet and exhaust valve on the right of the pic is very thin
retrorigg Posted March 15, 2010 Author Report Posted March 15, 2010 yeah i noticed there aint much of a gap, they are all the same tho, think the angle of the pic makes it look closer, although they do look bigger valves from what i remember last time i had a crossflow head off 20 yrs ago,or maybe its coz i had 1300,s 20yrs ago , hence my reason for asking,
Fiesta Steve Posted March 15, 2010 Report Posted March 15, 2010 Looks standard to me too, the two inlets look like they maybe slightly different to each other?? could just be the photo, maybe it had a new valve at some stage in its life.
Fiesta Steve Posted March 15, 2010 Report Posted March 15, 2010 Personally, I like the natural aluminuim finish on timing covers, coincidentally today I plopped a spare one I had in a tray of thinners to remove the black paint that someone had badly applied, got it off a treat
5hane Posted March 15, 2010 Report Posted March 15, 2010 definatly standard head (port wise) you can see the step in the port that would have been removed cortina mad- what you talking about get some propper man sized valves in there, tonnes of room
Fiesta Steve Posted March 15, 2010 Report Posted March 15, 2010 cortina mad- what you talking about get some propper man sized valves in there, tonnes of room Like these
5hane Posted March 15, 2010 Report Posted March 15, 2010 thats the one there hench ! whats the spec's ?
Fiesta Steve Posted March 15, 2010 Report Posted March 15, 2010 Thats just a usual 41.3/35mm set up, it looks a little different now though, thats how it was in my old engine. I have a head with bigger valves than that !!
5hane Posted March 15, 2010 Report Posted March 15, 2010 Thats just a usual 41.3/35mm set up, it looks a little different now though, thats how it was in my old engine. I have a head with bigger valves than that !! argh,, i need to keep up with the jones's ( mines 40 / 35 )
Fiesta Steve Posted March 15, 2010 Report Posted March 15, 2010 Thats just a usual 41.3/35mm set up, it looks a little different now though, thats how it was in my old engine. I have a head with bigger valves than that !! argh,, i need to keep up with the jones's ( mines 40 / 35 ) Inlet too small for the exhaust You need bigger inlets
Guest cortinamad-gonetoo Posted March 15, 2010 Report Posted March 15, 2010 definatly standard head (port wise) you can see the step in the port that would have been removed cortina mad- what you talking about get some propper man sized valves in there, tonnes of room i knew they can be bigger it just looked like one valve is maybe bigger and i thought it a bit strange
retrorigg Posted March 16, 2010 Author Report Posted March 16, 2010 started with the painting, the silver looks a bit cheesy but should be ok once its built up
retrorigg Posted March 23, 2010 Author Report Posted March 23, 2010 ok so why are some valves seats / holes bigger , this is the same head with the valves out , is this a case of someone doing a bodge
Fiesta Steve Posted March 23, 2010 Report Posted March 23, 2010 You need to measure the valves m8, it may have had a few new oversize valves fitted at some stage in is long life
Guest cortinamad-gonetoo Posted March 23, 2010 Report Posted March 23, 2010 yeah as above maybe just refitted a few oversize valves to cure a old valve problem looking good by the way
Toby Posted March 23, 2010 Report Posted March 23, 2010 That looks very tidy You might want to consider a steel bottom pulley - the pressed ones can fall appart at high rev's - mine made an attempt to escape through my radiator! Looks very smart though.
Billy_smith Posted March 23, 2010 Report Posted March 23, 2010 That looks very tidy You might want to consider a steel bottom pulley - the pressed ones can fall appart at high rev's - mine made an attempt to escape through my radiator! Looks very smart though. Ha ha ha i dont no where mine went!! i swear it hit the bonnet though lol!! All that was left was the centre of it and the nut
Billy_smith Posted March 23, 2010 Report Posted March 23, 2010 i was full chat at the time and there was an almighty bang and the ignition light came on, i shit meself thought i'd killed it lol! but then put me foot bak down and carried on i was only a minute from me house though. Toby how much is the steel one? is it about £35?
Toby Posted March 23, 2010 Report Posted March 23, 2010 ...how much is the steel one? is it about £35? https://www.burtonpower.com/product_mai ... m%20pulley £23! Almost free!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now