filter kings

[Posse]

when running should they be half full or to the top When i switch the engine off it fills up?

[escort21]

Thats just the excess pressure in the lines, carbs ain't using fuel so fuel flow stops but theres still line pressure

[Posse]

Thats just the excess pressure in the lines, carbs ain't using fuel so fuel flow stops but theres still line pressure

 

Ok thanks for that so am i right in saying i need to drop the pressure its on 3 bar at the moment and running a standard pinto. And its running like a bag won't idle and popping and there are signs of fuel over the back panel.

[KJ 1320]

Thats just the excess pressure in the lines, carbs ain't using fuel so fuel flow stops but theres still line pressure

 

Ok thanks for that so am i right in saying i need to drop the pressure its on 3 bar at the moment and running a standard pinto. And its running like a bag won't idle and popping and there are signs of fuel over the back panel.

 

45 psi from facet pump m8 are you sure!

[LEONMEX]

i only ran mine at 2.5psi mate much more & it used to run lumpier than usual & leak petrol through the carbs. At 2.5 psi it was plenty good ya make sure plugs are clean & good strong spark so its burning the fuel not chucking it out the exhaust. Might not be a problem with pressure? jsut another idea to keep you busy

[Posse]

i only ran mine at 2.5psi mate much more & it used to run lumpier than usual & leak petrol through the carbs. At 2.5 psi it was plenty good ya make sure plugs are clean & good strong spark so its burning the fuel not chucking it out the exhaust. Might not be a problem with pressure? jsut another idea to keep you busy

 

its burning the fuel and chucking it out the exhaust that's what its doing a running lumpy as fook.

[LEONMEX]

i only ran mine at 2.5psi mate much more & it used to run lumpier than usual & leak petrol through the carbs. At 2.5 psi it was plenty good ya make sure plugs are clean & good strong spark so its burning the fuel not chucking it out the exhaust. Might not be a problem with pressure? jsut another idea to keep you busy

 

its burning the fuel and chucking it out the exhaust that's what its doing a running lumpy as fook.

 

put a flamer kit on it mate that will burn it

seriously though try it at 2.5 psi mine was best at that,much more & it was a bastad on idle

[Fiesta Steve]

I use 2 psi with no problems