Jump to content

Recommended Posts

Posted

Hi,

 

I've drained the coolant from my mk2 (which just had water in it). As its all probably coming to bits i do not want to re fit the pipework and fill it all with coolant.

 

Will the engine be at risk of cracking due to the water expanding when it starts to freeze?

 

I've drained the water from the bottom of the rad, though there must still be some water in the engine.

 

Thanks.

 

J :)

  • Admin
Posted

Providing the coolant is drained as far as possible it should be fine as the space remaining will allow room for expansion if the water remnants freeze (though there shouldn't be more than dregs left in it). It's when the block is left full with no antifreeze that there's a real risk as there's no expansion room.

 

If you've any doubts, drain the block as far as possible and then put a 1/2 litre of antifreeze in it to mix with the remnants of water left in there.

Posted
Providing the coolant is drained as far as possible it should be fine as the space remaining will allow room for expansion if the water remnants freeze (though there shouldn't be more than dregs left in it). It's when the block is left full with no antifreeze that there's a real risk as there's no expansion room.

 

If you've any doubts, drain the block as far as possible and then put a 1/2 litre of antifreeze in it to mix with the remnants of water left in there.

 

Thanks.

 

I've drained it from the lowest point, the radiator drain. But i might chuck a little coolant in there to flush out the dregs /make a strong mix.

 

Thanks

Posted
Jack it up at the back to encourage as much of the remnants as possible to flow out

 

That sounds like a plan.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...