antz Posted March 24, 2007 Report Posted March 24, 2007 ok ive had the escort lowered by inches. just put on my new wheels 13x5.5 inch and im using 185/60 tyres. BUT on one side i have about an inch from the rear wheel arch to the tyre an on the other i have about 1cm!!!! whats wrong
antz Posted March 24, 2007 Author Report Posted March 24, 2007 why!? and i have a bad feeling my tyre is going to rub on my arch! any ideas
antz Posted March 24, 2007 Author Report Posted March 24, 2007 any way i can stop it rubbing my arch though i think its gonna rub cos its so close and as soon as i get anyone in the back its gonna grind away!
antz Posted March 24, 2007 Author Report Posted March 24, 2007 its on the list so it should be like that then?
Wessie Posted March 24, 2007 Report Posted March 24, 2007 did you lower it using lowering blocks? or de-cambered springs?
antz Posted March 24, 2007 Author Report Posted March 24, 2007 so a panhard rod kit would solve it? how much should i be looking to pay for one and how hard are they to fit?
mk2 stu Posted March 24, 2007 Report Posted March 24, 2007 Mate yer you need a panhard, you got to centre up the axle and then fit the panhard, rememberiing that it will still move to the off side very slightly as the axle rises and falls. get it lined up, fit the panhard and dont worry yourself bruv!
mk2 stu Posted March 24, 2007 Report Posted March 24, 2007 oh and go look at rally design for one, they're a piece o piss to fit, just make sure your rod bar is parralel to the floor when the car is rested on its springs!
Jay_harrier Posted March 24, 2007 Report Posted March 24, 2007 If you're really concerned you could roll the edges of the arch but I'm not a fan of it - the paint normally cracks & creates a water trap. Has the axle settled into the correct position? might be worth jacking it up slackening off the u-bolts, giving it a wiggle, then nip them up & check again. The Squires guys (RACE) do a high quality panhard rod kit at £72 + P&P, no website though.
antz Posted March 24, 2007 Author Report Posted March 24, 2007 cheers guys! gonna order a panhard rod kit asap! also found out the arch lip is rather large yet not big enoguh to do anything and ill try the u-bolt trick do i just slacken them off and tighten them again?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now