I think it sometime a case of getting around, meets, shows, trackdays, drag events, etc the more you get to know people... Does make it easier if you have car with you though imo......
Think there's a couple more mate :
Pinto v Xflow
13's, 15's or puff daddies
Old skool, new skool
Duratec or N/A YB
Jap & Vauxhall or Ford
MKI or MKII
And there's probably a couple more... But I wouldn't take any of them to heart TBH...........
It sounds like your old starter could be struggling with ur CR ratio... What is it 10.5:1...? The standard starter is fine when cool but when it gets hot after idling or RR, etc it will struggle like fook...
185.60.13 will be just fine for the arches... The MKII should take 8" wide wheels unarched. On your 7" wheels you could fit a 205 wide tyre... But you will have to tap in the lip on front arches to stop fouling on full lock if going down 2"...
So would I, exactly in those colours. Or I wouldn't say no to a MK2 in those colours either ....... with an all alloy 16v Pinto in it, etc ... Ah, pipe dreams again...
Ah the good old Works Lotus Cortina.
As driven by Sir John Whitmore, Alan Mann + more maybe...
A Lotus Cortina traffic jam :
Well it's historic racing, I'm summising they're Lotus prepped...
So are you saying a standard cossie head on an otherwise identical bottom end will perform better than a bigvalve ported pinto head.
if you are then i really need to rethink my engine plans
Standard N/A Cossie head - yep...
But set your rev limiter to 7200 so as not melt your cast pistons... You need to rev to 8000 at least to take full advantage of the 16v design so get the head worked over as well and change the pistons & rods while u'r at it...
Yes, someone's going to have a busy winter...
I've got a challenging task list of measuring up for a new set of rims and maybe fitting them if I get time...
I'm sure other bits will crop up thou like general maintenance that these old cars require and the whole thing will need checking over after last track sesh ...
I bet it's a nice car n'all As Bod said it's a piece of history the guy bought and everything has its worth Interestesting that about the ally panels, didn't know that either
It's good aint it, a great engine...
You'll need a 2.1 re-bore, steel stroker crank and rods from Farndon, Accralite forged Pistons, good head work and ATD to build, a pro engine builder, high compression, 48's/50's, I could go on and money yep...
Yes...
And there was a burger place in watford Town Centre called 'Huckleberrys'. The chain never kicked off in a big way thou like BK...
And KFC is luverly but not as good as a Ruby...