Jump to content

escort21

Members
  • Posts

    2,605
  • Joined

  • Last visited

Everything posted by escort21

  1. They are different lengths
  2. Xflow...remember the valencia kent based engine was used in the ford KA
  3. My tina has the 2000e box and the standard shift is good anyway
  4. You need the short inlet manifold which sits higher than a normal one
  5. Its going up an inch at the front as i just twatted my xmember on a speed bump.....
  6. Ah yes, if you get one from burtons or rally design the thread size will be 3/8 unf and you want it 7/16 unf, throw it my way and i'll drill it out and retap it for you there is a place in leighton called Circuit Supplies which specialise in brake parts/master cylinders etc and the bloke has the same name as me .....could get one from there. Phone no.01525 385888
  7. Any beemer...seem to attract arogant people that brand.....
  8. I bought the threaded bits and top caps from rally design, had to mod the top caps and made new nuts to hold the dampers in, easy, found i had dry damper inserts anyway....easy ..just hope my welding holds
  9. Bloody hell...... ...wire your springs in the cups mate
  10. Made up some coilovers for adjustable ride height for the front of the tina and its scraping now, can't actually get out of my hump infested estate now though
  11. Well in the 'how to guides' room its got a link showing how to do it and the tubes only welded at the bottom....i'm gonna weld both ends to be safe i think....don't want my tina turning into a giant sled
  12. Look what you started mr xpackglyn
  13. So you put the screw nuts on before you welded the tubes on right?
  14. Coilover tubes on a strut do i only weld it on at the bottom or top and bottom?...
  15. The point of this thread was that someones car was eyed up by irish sounding workmen....which could possibly been pikeys..possibly not but you can't be to caretful and he was very worried. Just thought i'd remind everyone
  16. Yeah remember that Smokem'..I helped out with that bay
  17. If you'd lower your escort rick you could of given him fright on the corners
  18. escort21

    Nightwish

    Anyone else listen too em'?.....they fooking rock
  19. Escort rally car against a car built for tarmac only ....see see what would of happened if they'd put a proper tarmac escort up against the focus
  20. He also tried to chase me round a roundabout....i thought he was gonna roll it...so trawler-like
  21. Cortina 1 - escort cabriolet 0 on the way home from work.....
  22. Sintered things are made using a metal powder which is basically squashed in a die and heated at the same time, can use all sorts of different additives to make different properties to the finished article
  23. Cool...when can i have a proper ride?.....
×
×
  • Create New...