Jump to content

escort21

Members
  • Posts

    2,605
  • Joined

  • Last visited

Everything posted by escort21

  1. Good shit, thats quite a tidy install you done there
  2. Gave my piper one piece rocker thingy a refurb, machined and polished the top, shotblasted and painted it, made up some brass nuts and a stainless filler cap with brass nozzle
  3. That Jon Hills(COC bloke) been sat there for ages at his ranch(as he calls it)its a right pile of shit
  4. Put it on after the mot
  5. Isn't fiesta steve down that way? he'll know....Oi! steve!........
  6. Its not 10mins on a lathe, pinto flywheels are made of very tough cast iron, it takes me about half hour to do one properly just take the big outside band off closest to the block
  7. My daily is a 110 station wagon 1990 200tdi, cost me £2500 and costs £270 to insure, be careful with a 110 station wagon, if its got more than 8 seats its classed as a minibus, if you passed your test after 97 then you need to take a minibus test to drive it legally....or do what i did and remove the rear bench seats
  8. V8IAN has said it many a time, drill a hole in the side of the quickshift fit a grease nipple and pump it full of grease....hey presto a quiet rose jointed quickshift
  9. That is a good price, you couldn't build it for that
  10. Yeah i think id better fit one
  11. Well missed 2nd at 6.5k and it went off the rev counter, its also not a 205/injection bottom end, think ive knackered the thrust washers in it, it was going so well too
  12. Taking Lukey for a ride after doing loads of work on the engine and I missed a gear and over-revved it and damaged the bottom end happy new year
  13. They are different and the screen rubber is different too
  14. Yes, The base circle determines the rocker geometry especially on pintos, bad geometry means less lift and bad wear in a short period of time. I fitted an rl31 to my pinto with bad goemetry and a kept having reliability problems, fitted a rl30 and corrected the geometry and its much faster, quieter with the less lairy cam
  15. Good fun today near Luton....no gritting whatsoever and I was one of the only cars on the road...well landrover... Up to a foot of snow at least over toddington
  16. Once you sold a car its no longer yours so what the new owner does with it is up to him
  17. Make sure the oil spray bar is bent at the corredt angle if its a kent cams kit or part....mine wasn't and the oil missed the cam completely and fooked it
  18. Heres a one piece Piper xflow rocker thing Ian was talking about ive got laying about...
  19. Its either running to rich/choke stuck or you could have an air leak
  20. Your gonna lose power with them
  21. You'll win....but....yes i do be well up for that next year
  22. Dunno but i want it
  23. Couple of weeks ago a ruined my rl31 cam when it got oil starvation, was never happy with how it performed anyway. So after picking up a bvh and having to renew the guides myself i managed to pick up a rl30 lighting rod cam. Then i opened David Vizards pinto tuning book and shortened the valves, made some lash caps etc to sort the rocker geometry. Just built it back up and taken it for a run....its so quick....quicker than its ever been and its cost me 50quid for the cam, Thing is is its not even been tuned yet , so proud that I did all the machining myself and its actually made so much difference...Timspeed performance ...cheers to WPE for advice too
  24. Capris started being made in the 60s so there orgins even though some are late are damn oldskool......simple as
×
×
  • Create New...