andytechno Posted October 25, 2007 Report Posted October 25, 2007 just rummaging the internet for an engine and ive come across a 2.0 pinto out of an old transit.fully working offers around 200buff.the whole transit thing puts me off for some reason. discuss with me
oliwally Posted October 25, 2007 Report Posted October 25, 2007 What age transit? miles on the clock? if its a later one the its a 205 block/sierra injection engined one. bit steep for a pinto but a decent one possibly
andytechno Posted October 25, 2007 Author Report Posted October 25, 2007 gonna ring them in the morning to find out about the condition,doesnt say much on the add.
escortmad79 Posted October 25, 2007 Report Posted October 25, 2007 £200 for a boat anchor? Are they rarer than Crossflows these days
PAUL MANN Posted October 25, 2007 Report Posted October 25, 2007 ive heard that some transit pinto's have a lower compression ?still seems abit steep
james p Posted October 25, 2007 Report Posted October 25, 2007 if it comes in the transit youll get £75 for the van less the lump so bid him and scrap the van after as long as its not low comp of course
Guest MK1gaz Posted October 25, 2007 Report Posted October 25, 2007 Yes some van and P100 pick up truck pintos are low compression but if rebuilding then it doesn't matter . Most pintos seem to be around £80-£100 but people will pay more if they can see it running and they're not doing a rebuild on it . Pintos and x-flows seem to be worth more than the more modern ford engines from the 90's etc as there's millions of those and not many people want them
oliwally Posted October 25, 2007 Report Posted October 25, 2007 Pintos and x-flows seem to be worth more than the more modern ford engines from the 90's etc as there's millions of those and not many people want them
oliwally Posted October 25, 2007 Report Posted October 25, 2007 I'll let the people decide,is this gaz about pintos or everyone else on the benifits of the "CHEAP" zetec option
Admin Vista Posted October 25, 2007 Admin Report Posted October 25, 2007 Pintos and x-flows seem to be worth more than the more modern ford engines from the 90's etc as there's millions of those and not many people want them Nah Gaz is right on this one, as the older engines get rarer people are prepared to pay more for them, especially those wanting the early blocks for historic racing. Still £200 sounds way too much to me and coming from a transit there's a strong chance it's a low compression engine, unfortunately I don't know of anyway of telling externally if this is the case. Doesn't really matter if you're planning a rebuild, but it'd be a hell of a let down to go to the trouble of installing it as is only to find you only had 80 odd bhp
Guest MK1gaz Posted October 25, 2007 Report Posted October 25, 2007 I'll let the people decide,is this gaz about pintos or everyone else on the benifits of the "CHEAP" zetec option Your allowed to talk about pintos if it's "on topic" . This is a pinto topic thread so it's ok ............
oliwally Posted October 25, 2007 Report Posted October 25, 2007 I'll let the people decide,is this gaz about pintos or everyone else on the benifits of the "CHEAP" zetec option Your allowed to talk about pintos if it's "on topic" . This is a pinto topic thread so it's ok ............ Nahnahannnah
Posse Posted October 25, 2007 Report Posted October 25, 2007 Try and keep to topic without start gaz off
Guest MK1gaz Posted October 25, 2007 Report Posted October 25, 2007 Just looked on ebay and they're roughly £50-£120 depending weither they're seized or in tatters . P.s. some still have a granada attached
bortaf Posted October 26, 2007 Report Posted October 26, 2007 Scrap's £80 a ton round here, thats £150 back if it's a LWB If the origional engine 99% it'll be LC
andytechno Posted October 26, 2007 Author Report Posted October 26, 2007 so if its low compresion what does it mean in comparison to a high compresion. sorry ime noob.i dont know a lot about engines
Admin Vista Posted October 26, 2007 Admin Report Posted October 26, 2007 In a nutshell it means less powerful. It's achieved by use of shorter pistons.
andytechno Posted October 26, 2007 Author Report Posted October 26, 2007 but u can put bigger pistons in it right.strage that i would of thought it would be more powerfull with being in a van.it dont make sense.vans pull a lot of weight ,but they put in a less powerfull engine
Admin Vista Posted October 26, 2007 Admin Report Posted October 26, 2007 Yes they can be rebuilt to any spec you like, my pinto was originally a low compression P100 engine. Not anymore
bortaf Posted October 26, 2007 Report Posted October 26, 2007 Vans use a LC engine and a single choke carb as this give more torque but less BHP, torque is what you need to shift weight thats why diesel transits have buggre all BHP and lots of torque Even the V6 3.0 uses a single choke and LC pistons in a van to raise the torque and you'de think they had more than enough already
over_head_cam Posted October 26, 2007 Report Posted October 26, 2007 £100 max I'd say, unless it was a nice low-miler and could be heard running
Mr Sam Posted October 26, 2007 Report Posted October 26, 2007 i cant see whats wrong with LC engine my old P100 field truck bloomin flew
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now