facet mounting...............

[jay]

i've got a

whats the best way to mount them, horizontal, or vertical?? or does it not matter?

 

also, is it best to run the power through a relay, of just a switch?

 

ta muchley.

[Posse]

vertical jay ive just got mine to a switch Where abouts are you going to mount it inside or outside the car?

[Johnson]

are these gravity fed, and if so ideally would they not need to be mounted bellow the fuel tank???

[over_head_cam]

Not gravity fed, its a pump ;)

They can cope with run-back and will pump a bit of air no problem.

 

The manufacturer recommends vertical, but they will work either way

[jay]

vertical jay ive just got mine to a switch Where abouts are you going to mount it inside or outside the car?

 

 

inside, still gona use standard tank..

 

 

prob going to make a bracket and mount vertically..

 

 

cheers fella's.

 

oh want pressure regulators best to use???

[Posse]

just get one off ebay jay there about £30 also these are good from alimax.

 

[over_head_cam]

A Filter King or a Holley will do the job as far as regulators go

[BaileyMex]

vertical but best run with a regulator as OHC said

[jay]

thanks all....

 

just got to order a fuel reg.

 

is it right that twin 45 dellorto's want to be run at about 3psi??

[wild pete]

overhead cam wrote;

Not gravity fed, its a pump

They can cope with run-back and will pump a bit of air no problem.

mine didnt have you seen louie photo of ford fair ,being pushed , it dont like sitting in traffic for long , i got mine underbonnet fairly high up , didnt get round to moving it , will do now tho

[ratman]

I run mine in the boot mounted horizontal on two exeaust bobbin mounts and a filter king set at 2-3llb

[over_head_cam]

Boot is best

 

Unless you're racing and the particular rules say it must be outside

[lead foot]

i have mine mounted under the bonnet using cotton reel rubbers, and run it at 2 psi.