Which rolling road?

[nelly231]

Can any one recomend a rolling road in the south east that is capable of all the usual things like setting up webers and cam timing but would also be able to map an MBE for ignition?

I have spoken to SPC in horsham and they seem like they know there stuff but wondered if anyone had any other recomendations?

[Slammed]

track & road in essex

 

steve is a top bloke couldnt recomend anyone else more

[Noodles]

Pete at Sanspeed Bexleyheath prob a bit far

[Mk 1 Mark]

track & road in essex

 

steve is a top bloke couldnt recomend anyone else more

 

Set up am XE on MBE and very good with carbs...

01708869189

[nelly231]

ok thanks for that will give them a call. where in essex are Track and Road?

[5hane]

there close to dartford tunnel

 

*think*

 

if you come off the dartford tunnel corssing, (from kent) and leave the motorway, u will be on a huge roundabout.

 

this is the same if you come from lakeside, just go towards dartfor crossing (DONT GO OVER IT , stay on the roundabout)

 

theres a premiour inn.. take the exit straight after that (theres traffic lights there)

 

then keeeppp following the big long road (think its the old a13).. untill you reach a bridge with 2 roundabouts, co across the bridge (2nd exit each roundabout)

 

then if you look to ur left, there will be a caravan selling place,

 

and its right next to that

 

 

 

 

where are you coming from m8? ill do a google map special for you

[Mk 1 Mark]

TRACK'N'ROAD

RAINHAM ESSEX

RM13 9EB

 

Noakes Ind estate

 

Just of the A13 Rainham M25 onto the A13 towards london next exit come of, turn right,

then straight over roundabout 500 yards on the left hand side before Cafe

[nelly231]

Cheers guys. Would be coming up from sussex so dartford is little more than an hour.

[Mk 1 Mark]

HT racing 5 mins from brands hatch have a rolling road now...

Bit nearer and Very good indeed

[nelly231]

sounds like im spoilt for choice. do HT racing do mapping as well?

[Toby]

Yes pretty sure they do.

[kevmk2]

I would say HT's or Sanspeed, two of my mates have had bad dealings with Track and road in the past

[Contract Man]

HT racing have recently set themselves up with a rolling road.

 

At the back of Brands hatch

 

Need to check they have their software ready for the print outs, I have been down there on a couple of Saturdays.

 

TBH if you have Aaron from HT and Steve from Vulcan pointing things in your engine you know you are in safe hands????

[Darran]

I would say HT's or Sanspeed, two of my mates have had bad dealings with Track and road in the past

 

Have to agree,most people only go to road and track once.....

[dannyb]

sounds like im spoilt for choice. do HT racing do mapping as well?

 

have a look on there web site, dynoit.co.uk

there might be the info your looking for.

[Retromotorsport]

I would say HT's or Sanspeed, two of my mates have had bad dealings with Track and road in the past

 

Have to agree,most people only go to road and track once.....

 

Except the countless Oval track racers that have been using them for years, and the owner of a few F1 cars including Sennas turbo car, also the owner of the Group C Jaguar that got FTD at Goodward. Then you have Mosler Cars , and Land Rover, and Ford, and Vauxhall and some of the top tuners in the country HT, ARE, Roush, Vulcan, and some of the top competitors in the country .... Mick Storrar who takes his 1600cc 105e out and beats top class WRC on the Isle of Mull every year., Steve Boughton of SBD who wins hillclimbs up and down the country... etc etc

 

have a litle look

http://www.tracknroad.com/

 

Jag on rollers

http://www.tatdyno.com/dyno_movies/Jaguar_XJR12_028.mpg

[Darran]

I would say HT's or Sanspeed, two of my mates have had bad dealings with Track and road in the past

 

Have to agree,most people only go to road and track once.....

 

Except the countless Oval track racers that have been using them for years, and the owner of a few F1 cars including Sennas turbo car, also the owner of the Group C Jaguar that got FTD at Goodward. Then you have Mosler Cars , and Land Rover, and Ford, and Vauxhall and some of the top tuners in the country HT, ARE, Roush, Vulcan, and some of the top competitors in the country .... Mick Storrar who takes his 1600cc 105e out and beats top class WRC on the Isle of Mull every year., Steve Boughton of SBD who wins hillclimbs up and down the country... etc etc

 

have a litle look

http://www.tracknroad.com/

 

Jag on rollers

http://www.tatdyno.com/dyno_movies/Jaguar_XJR12_028.mpg

 

Shame they dont smile.....

Sure there good but strange guys to deal with.

[Retromotorsport]

But Darran, your not paying them to smile ....

 

Steve P has been there .. done that,

go into his place with the " i know best" attitude and he'll take you with a pinch of salt till you've proved yourself ... hes honest.

Steve G , ex Hart, built engines for Boreham, one of the best around a Lotus 907-912 engine, one of the best around a BD and countless other lumps. honest and is the yin to Steve G's yan ...

 

if you want a rose tinted view of an engine, dont go to T&R ..if you want the truth, then go there,

 

But at the end of the day, as long as you going in and get a figure, and come out with a better figure (and not just bhp, your looking for a bigger lump under the curve) then thats fine.. pick a rolling road, and stick to it, build a relationship with the operators and you'll be fine.

[mk1ian]

if you want to be treated/spoken to like a decent human being go to sanspeed or HT's. if you wanted be treated/spoken to like shite then go to track and road.

 

peter at sanspeed is a top guy and very friendly so are the guys at HT's

[MK2Ed]

pick a rolling road, and stick to it, build a relationship with the operators and you'll be fine.

 

Pick proximity & reason I go Northampton Motorsport 12 yrs...

[Slammed]

i will vouch for track and road, because one of the steves used to work for burtons years ago, hekniows a lot and so does the other steve! i will always go there as they seem great! there southerners and get along with southerners

 

sanspeed on the other hand where do i start, i would start but people on here wont like what i would say...

 

so i aint saying nuffin

 

rant over.. track and road is the best if you get to know them

[kevmk2]

Well two of my mates went there and one of their engines blew up after one of the Steves revved the granny out of it, it went well past the limit that the engine was intended to go to. And the other guy Danny didnt even set foot in the door after speaking to them, as their attitude stunk.

[Girl Racer]

I went to HT racing yesterday to get mine set up and was very pleased. I came out with 160 at the flywheel and got a print out too, very impressed.

[dannyb]

 

sanspeed on the other hand where do i start, i would start but people on here wont like what i would say...

 

so i aint saying nuffin

 

i have lived in bexleyheath for most of my 32 years and

sanspeed have a bad reputation.

[Slammed]

 

sanspeed on the other hand where do i start, i would start but people on here wont like what i would say...

 

so i aint saying nuffin

 

i have lived in bexleyheath for most of my 32 years and

sanspeed have a bad reputation.

 

with you mate! i used to work there until they let me down, apparently there was no work, when i damn right knew there was! much to my despair i see a new kid working there.

 

go to someone else but I will not go sanspeed