stickerboy Posted February 7, 2009 Report Posted February 7, 2009 Does anyone know here I can get my original glass from my 1600 Sport 'cleaned'. I would try and source new glass but it all still has the etchings in the corners. Not sure whether they can be polished? Cheers
Retro-gone. Posted February 7, 2009 Report Posted February 7, 2009 you can buy a kit, probably on ebay, the stuff you need is 'jewellers rouge'.
Admin Vista Posted February 7, 2009 Admin Report Posted February 7, 2009 typically though etching goes pretty deep or it wouldn't be any deterrent to thieves, I reckon you'll be lucky to polish it out.
Retro-gone. Posted February 7, 2009 Report Posted February 7, 2009 i dont think he wants to polish the etching out, unless ive read it wrong.
stickerboy Posted February 7, 2009 Author Report Posted February 7, 2009 I want to keep the original glass and so also keep the etching. Just want to clean the glass up as best as I can. I think it will spoil the car if the glass looks S#*T!!
Retro-gone. Posted February 7, 2009 Report Posted February 7, 2009 is it scratched or just dull and dirty?
stickerboy Posted February 7, 2009 Author Report Posted February 7, 2009 I think a bit of both. That's what you get from being stuck in a barn for 15 years!!!
Retro-gone. Posted February 8, 2009 Report Posted February 8, 2009 youve been stuck in a barn for 15 years??
stickerboy Posted February 8, 2009 Author Report Posted February 8, 2009 YES I'm scratched, very dusty and quite dirty!
FredTransit Posted February 10, 2009 Report Posted February 10, 2009 Have you cleaned it at all yet? If not first try good old newspaper. Take a sheet and crumple it up, and rub the glass hard. Glass is surprisingly resilient, the muck should come off, the scratches on the other hand you might need to polish, but you will get a better idea once the dirt is off.
Mick The Cabbie Posted February 10, 2009 Report Posted February 10, 2009 I always use Mr Muscle glass cleaner with that blue polyroll stuff. Works a treat I think the newspaper idea works well too especially with a shake or two of vinegar. Just don't use your old fish & chip wrappings though. That'll cause it to smear
Guest cortinamad-gonetoo Posted February 10, 2009 Report Posted February 10, 2009 surely if you get a new screen you can get it etched ??
stickerboy Posted February 10, 2009 Author Report Posted February 10, 2009 I would get a new screen but that will then stand out like a sore thumb from the rest of the glass. Also I'm getting close to the bottom of the money pit!!! I will try both suggested ideas though Cheers
FredTransit Posted February 10, 2009 Report Posted February 10, 2009 Also try plain fine steel wool. NOT brillo pads, they have abrasive bits.
john_3.0s Posted February 10, 2009 Report Posted February 10, 2009 i have used a stanley blade before (carefully!) running up and down the screen a bit like a tile scraper u use in the bathroom. great for getting off att the stuck on shite. clean glass dont half make a car look good
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now