Jump to content

Recommended Posts

Posted

Xmas came early for me today. Got a big parcel from summit racing.

Inside my new chevy heads AFR 195cc eliminator fully CNC ported heads. These have got to be the best bolt on chevy heads money can buy. Should be worth around 50hp over my current ProTopline heads. They flow 300cfm of air at .600 valve lift. My old protoplines only flowed about 250cfm at that same valve lift and they have a larger 200cc port.

AFRheads1.jpg

AFRheads2.jpg

The valves are huge 2.080 inch inlet valve 1.60 inch exhaust. Thats a 10 pence piece in the pic

AFRheads3.jpg

Taking the engine out my capri tomorrow. Gonna strip it down and rebuild it. Will try get a thread going in the project room when I build it back up.

Posted

AFRs [air flow research] have a good reputation for producing the goods, are they the same company that was Alan Root,

Posted

mint!!!! same size valves that are in my chevy heads, they`re huge!! dont suppose you know of any cheap blocks for sale? not too fussed on crank, pistons, rods as it`ll be getting `stroked`!! :thumbsup:

Posted
AFRs [air flow research] have a good reputation for producing the goods, are they the same company that was Alan Root,

Yes these heads are a lot higher quality than my protopline heads (which needed machining just so the pushrods would fit :?) . They look too good to put on an engine. Brodix heads and darts new pro1 head are the only ones that get close to the flow numbers of these.

Posted
they do look the nuts get a thread going . what power you aiming for ?we need a few more v8 capris to mix it up with the cossie s :thumbsup:

 

Well the engine was eleged to be making just over 500hp with the old heads but I have my doubts that it was making that much probably more like 450hp if that. With these heads I think 500hp could easily be made. I see a 383 build in an american mag that was ment to be making 615hp with these heads but a fair bit more cam than I have. Though I just want the car to get in to the 11s comftably Then I shall rig up some nitrous :twisted:

Shall try get a thread going soon just need to get myself a decent camera to take some pics. The engine blocks already out ready to be stripped down :thumbsup:

Posted

i keep trying to guess what bhp i have should be 450 ish but i might try and get it set up on a dyno but its all cash i have not got the plan at the moment is to just finish the 4link/cage and go have some fun go get a camera :mrgreen:

Posted
AFRs [air flow research] have a good reputation for producing the goods, are they the same company that was Alan Root,

they were brownfield before then ken sperling took over and created AFR

i have the old spec 195 on my nova

Posted

Very pretty!

 

Now they're MAN SIZE valves! :ykt:

 

Hope it does the do for you when it's all together, as you say - seems a shame to bolt them on. They just look so good! 8)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...