Drilling out alloy wheels

[ilovegrannys]

I brought a set of 17's Audi TT rims to make the Granny a copy of this months back page, low & behold the PCD is different to the Audi - i know i should of checked first!

 

Does anyone know where i can get these dilled out by 2mm? I have googled it with one result, its in Essex & i am in Devon.

[Fiesta Steve]

I brought a set of 17's Audi TT rims to make the Granny a copy of this months back page, low & behold the PCD is different to the Audi - i know i should of checked first!

 

Does anyone know where i can get these dilled out by 2mm? I have googled it with one result, its in Essex & i am in Devon.

 

Post them

[V8ian]

Local machine shop and get them Unilugged.

[285Andy]

have you looked into wobble nuts? they allow a certain over/under size pcd fitment as the washer coller is like a loose fit.. lots of vw owners use them i think as it allows them to fit 98mm pcd wheels onto 100pcd hubs.

 

try googling them as im not 100 percent sure these will help you in anyway

[ilovegrannys]

Cheers peeps!

[you'll get 10s on that]

Wobble bolts!!!!!! Granny is studs AND 5X112...tt 5X100 THATS NO 2MM

 

Go on to the water pumper VW sites I'm sure someone offers conversion spacers 100~112.

 

If no PM me and I will show you how it can be done and you can commisson a local machineshop to do it for you...safely and correctly

[sitting_budda]

depends on the alloys...

 

older audis are 100.... newer audis are 112

 

Agreed, it wouldnt be advisable with wobble bolts though, definately use an adapter plate.

 

But if they are the earlier ones it might be worth selling them and getting some repro ones which will fit.... much less hassle and no adapters changing the offset of the wheel

[ilovegrannys]

depends on the alloys...

 

older audis are 100.... newer audis are 112

 

Agreed, it wouldnt be advisable with wobble bolts though, definately use an adapter plate.

 

But if they are the earlier ones it might be worth selling them and getting some repro ones which will fit.... much less hassle and no adapters changing the offset of the wheel

 

oh right, i have got the old 99 >Audi TT rims! Well now who's a tit! What a waste of money, that will teach me!!! Cheers for the advice matey.

[285Andy]

Wobble bolts!!!!!! Granny is studs AND 5X112...tt 5X100 THATS NO 2MM

 

Go on to the water pumper VW sites I'm sure someone offers conversion spacers 100~112.

 

If no PM me and I will show you how it can be done and you can commisson a local machineshop to do it for you...safely and correctly

 

never said wobble BOLTS mate. but yeah, if its like 112mm pcd, forget it lol