Jump to content

Recommended Posts

Posted

:lol:

 

How hard (or even possible) would it be to connect the heater controls to an immobiliser??

 

There will be no heater in my car at all, but could those slidey switches be connected to an immobiliser instead??? Nobody would ever think to move those to start it 8)

Posted
Doh :mrgreen::mrgreen:

To be fair I did think of this before posting.

 

But I feel the chances of the thief reading this forum, then switching the heater panel on every Mk1 Escort in the UK in the hope that its mine is quite remote :mrgreen:

 

And considering that said car isnt even in the UK at the moment, it makes it even less of a chance :lol:

  • Admin
Posted
Doh :mrgreen::mrgreen:

To be fair I did think of this before posting.

 

But I feel the chances of the thief reading this forum, then switching the heater panel on every Mk1 Escort in the UK in the hope that its mine is quite remote :mrgreen:

 

And considering that said car isnt even in the UK at the moment, it makes it even less of a chance :lol:

 

What happens when an unsuspecting female passenger decides draughty old escorts are cold and tries to turn the heater on?

Posted
What happens when an unsuspecting female passenger decides draughty old escorts are cold and tries to turn the heater on?
:shock::shock::shock:

Well yes that could pose a slight problem...

 

But then again, i'd have to be lucky enough to have a girl in the car in the first place - so the question still stands :lol:

Posted

 

But then again, i'd have to be lucky enough to have a girl in the car in the first place

 

Have you not hear of the pulling power of an old ford, they are veritable foofy magnets :mrgreen:

 

 

 

 

 

 

Well the mk1 aint worked for me yet but ive not gave up hope :lol::lol::lol:

Posted

I m sure it could be done ................... do i think it's worth doing ?

 

 

Tbh .................. No

 

Be better off getting a Cat2 Immobilliser that has a chipped / transponder which you fit on your key ring, when the chip is near the antenna pickup the immobilliser switches off.

 

 

You can also put the antenna elsewhere and activate it by door opening or pushing a hidden button if you wanted to make it more difficult.

Posted
IBe better off getting a Cat2 Immobilliser that has a chipped / transponder which you fit on your key ring, when the chip is near the antenna pickup the immobilliser switches off.

I like it, lots 8)

 

pushing a hidden button if you wanted to make it more difficult.

This is pretty much what I meant. The heater slide would act as the "hidden button". It wouldnt take much to feel around and find a button, but who's going to think about moving a heater control 8)

Posted

The button is the same as a door pin switch, when the door is opened (on a normal install) the antenna is activated and starts searching for the chip.

 

Once the chip is within a set distance the immobilliser is switched off and car will start when key turned.

 

This system is basically what's fitted standard to nearly all Uk cars from 1998 onwards, i:e Ford / Vw / Peugeot etc. etc. with chip built in the keys.

 

This is one of the ones i use as the key ring part is strong and doesn't get damaged easily as some do.

 

The Autowatch 171PPi transponder based system requires no conscious effort by the driver to operate the system . It works exactly as the factory fitted transponder immobilisers. The only difference is that the transponders are supplied separately and are not integrated into the vehicles ignition key. Other advantages are there are no batteries to go flat or recepticals to be damaged Features

 

Coded Transponders

 

Pin-code override

 

On-board Immobilisation

 

17120PPI_System.jpg

 

Self-arming Immobiliser

 

Anti-tamper security housing

 

Ignition Anti-Hot wire

Posted
The button is the same as a door pin switch, when the door is opened (on a normal install) the antenna is activated and starts searching for the chip.

 

Once the chip is within a set distance the immobilliser is switched off and car will start when key turned.

 

This system is basically what's fitted standard to nearly all Uk cars from 1998 onwards, i:e Ford / Vw / Peugeot etc. etc. with chip built in the keys.

 

This is one of the ones i use as the key ring part is strong and doesn't get damaged easily as some do.

 

The Autowatch 171PPi transponder based system requires no conscious effort by the driver to operate the system . It works exactly as the factory fitted transponder immobilisers. The only difference is that the transponders are supplied separately and are not integrated into the vehicles ignition key. Other advantages are there are no batteries to go flat or recepticals to be damaged Features

 

Coded Transponders

 

Pin-code override

 

On-board Immobilisation

 

Self-arming Immobiliser

 

Anti-tamper security housing

 

Ignition Anti-Hot wire

 

 

im going to go for somthing like this instaed of what ive got at the moment when i can stop breaking the fooking car :evil:

Posted

On a normal car i would supply and fit for £145, on a older car i would take more time to hide the wiring etc, so may be a little more.

 

I can do supply only to members if they wanted to (not suppose to) it won't be thatcham approved unless fitted by a Insurance approved engineer like myself.

 

 

I would need to get an exact price but i'm guessing about £60 to supply only, i can get them posted out direct from my supplier to save on postage, they do come with instructions but i can give any help if needed.

Your looking at connecting approx 9/10 wires.

 

I also have engineers i use nationwide if you needed a local fitter.

 

May also be able to get some others but these are heavy duty and last a good time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...