samurai Posted December 4, 2009 Report Posted December 4, 2009 Whats the material spec of the wire that is used to hold the exhaust wrap on the manifold? I need some that wont break when its twisted on
4-Door Pete Posted December 4, 2009 Report Posted December 4, 2009 Hi, I used stainless steel cable ties, so long as you don't pull them too tight hey won't break. I've had them on my car for 18 months and they haven't budged. pete
vibrating_Cake Posted December 4, 2009 Report Posted December 4, 2009 yehh stainless ties, or jubilee clips . stainless ties generally dont come back off again, but you dont need to, remember. if you're doing exhaust wrap make sure the wrap is soaked in water then tie it in, once its dried out (with loads of smoke to go with it) re-pull the ties and cut the ends off jobs a good-en
vibrating_Cake Posted December 4, 2009 Report Posted December 4, 2009 oh and when you twist it on, go over yourself and tie it so when you pull tighter it pulls the overlaying layers at the top of the manifold tight, then you can pull all you want, dont need ties to start wrapping, on my old exh manifold i only used ties on the bottom, the top was heald on by the way i wrapped it. also when its wet its strechier, so it shrinks when it dries, tightening the whole thing up onto the exh mani =)
samurai Posted December 4, 2009 Author Report Posted December 4, 2009 I have wrap around the manifold,it came with it and i was gonna wrap it around my clutch and speedo cables. I just got some make yourself j clips made of stainless steel.
V8ian Posted December 4, 2009 Report Posted December 4, 2009 I use Stainless locking wire, 3 wraps round and twist off together both ends
rallyesport04 Posted December 4, 2009 Report Posted December 4, 2009 thermo tec make the proppa stainless ties for exhaust wrap i used locking wire in the past an it has let the exhaust wrap to unravel ive also used jubillee clips they worked fine just look a little unsightly compared to the stainless ties
Toby Posted December 5, 2009 Report Posted December 5, 2009 There are other options for insulating your cables - have a look at all the options here.... http://www.agriemach.com/default.php?cPath=0_7 They do the stainless "snap straps" ties too, which are sort of like metal cable ties that you cut to length.
Fiesta Steve Posted December 5, 2009 Report Posted December 5, 2009 They do the stainless "snap straps" ties too, which are sort of like metal cable ties that you cut yourself on!! Just my experience on using them
Toby Posted December 5, 2009 Report Posted December 5, 2009 They do the stainless "snap straps" ties too, which are sort of like metal cable ties that you cut yourself on!! Just my experience on using them Not just yours!! Neat though!
Fiesta Steve Posted December 5, 2009 Report Posted December 5, 2009 They do the stainless "snap straps" ties too, which are sort of like metal cable ties that you cut yourself on!! Just my experience on using them Not just yours!! Neat though! lol, glad I'm not the only one that nearly lost a pint of blood using these
Fiesta Steve Posted December 5, 2009 Report Posted December 5, 2009 They double up as good torniquets fpmsl
samurai Posted December 5, 2009 Author Report Posted December 5, 2009 I ordered some proper heat wrap ties now from ebay Thanks
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now