moredoorAsh Posted January 19, 2010 Report Posted January 19, 2010 Popped to my local small motor spares shop today who are usually very helpful, tried to get a price of a clutch for my 1600 x-flow. Was first told i would be £100 with the little discount they give me and then they decided they couldn't even get it There must be somewhere that still does kits new surely???? Anyone know where please Then i thought i'd fit the new rear wheel cylinders i'd bought, every time i tried to remove the pipe it just turned with the nut/nipple I've already fooked the front pipes from the flexi to the calipers in the same way so i gave up and had a cuppa... Can anyone surgest a certain brake line making kit as i think i'm just going to replace the lot now Cheers Ash.
bomber1 Posted January 19, 2010 Report Posted January 19, 2010 ive got a couple of factors around surrey/hampshire border that are very good in sourcing non main stream parts tho doubt that will help you in kent its more down to having good staff than parts not available. when i had my 4door (x-flow) the clutch went friday afternoon so striped it out there n then so saturday i could get a clutch and fit it. i rang everyone major factors and specalists a week minumum wait! then rang a small factors in borden. i told him what i was after then waited for the laugh down the phone! what i got was yes m8 on the shelf so pushing my luck i asked if they had a cable to go with it. all here he said so i was down there like a shot couple of weeks later same car the exshaust was shot i had already been told i wouldnt be able to get a center section or no one does them anymore! rang same factors 3 hrs later complete exshaust with fittings on the shelf
bortaf Posted January 20, 2010 Report Posted January 20, 2010 Try a DECENT motor factors, QH still list a kit for the escort so anyone who deals in QH parts can order it in IF they can be arsed i can get em trade for under £50 so non trade should be no more than £70, i'd try a bigger place then go back and tell the place you tried earlyer to try harder in the future
moredoorAsh Posted January 20, 2010 Author Report Posted January 20, 2010 Phoned Burton in the end and posted the kit is £88. Mate at work has got a brake pipe flange beveling thingy he'll lend me so all sweet there too.
sitting_budda Posted January 21, 2010 Report Posted January 21, 2010 not sure where abouts in kent you are, but try B.D.S Motor Spares Tel: 01322 271044 252, Lowfield St, Dartford, Kent DA1 1LH Theyve been great sourcing bits for my escorts over the last 10 years If they haven't got it in stock, they normally can get it next day.
V8ian Posted January 21, 2010 Report Posted January 21, 2010 Another place to try is 4u2Fit, in Maidstone, Roy is a top fella, and used to rally some tasty Escorts and Sunbeams a few others too, Allways get discount in there too
moredoorAsh Posted January 21, 2010 Author Report Posted January 21, 2010 I'm quite close to maidstone and Dartford is only 20 mins away. I've made a note of those, always handy to know where to get bits from Cheers
V8ian Posted January 21, 2010 Report Posted January 21, 2010 4U2Fit is at Barming, almost opposite Maidstone CFE,
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now