sambo Posted January 24, 2007 Report Posted January 24, 2007 Just got back from picking up my latest bright idea................................................a N/A cosworth engine!! Well chuffed to say the least, apparently its putting out 208 BHP and is running on the pinto block not the steel cranked cossie one. but who cares ! It has 48's and kent supersport cams. Trouble is i bought the engine on a ' bought as seen' basis so it could be a pile of poo with standard cams etc or worse, not run atall. He who dares wins i suppose!! No doubt i will be putting up posts left, right and center about what does this do and what does that do etc !!!! Never worked on a cossie before. Damn i'm excited , sorry.
sambo Posted January 24, 2007 Author Report Posted January 24, 2007 lol, just put the reserve 'RIDICULOUSLY' high!!! so in effect, yes!. This new engine IS my new project that i was looking for!
Gonzo Posted January 24, 2007 Report Posted January 24, 2007 you gonna save up for a cossie steel crank then? well done mate. would the cossie head not fit your bottom end?
Admin Vista Posted January 24, 2007 Admin Report Posted January 24, 2007 lol, just put the reserve 'RIDICULOUSLY' high!!! so in effect, yes!. This new engine IS my new project that i was looking for! How do you change things, my friend is a bit of an eBay numbnuts and listed a very rare and valuable classic bike without a reserve, he's now shitting himself in case it doesn't reach what it's really worth (estimated at £6000 or £7000, for a 125 !) Can he add a reserve now someone has bid? http://cgi.ebay.co.uk/RARE-CLASSIC-HOND ... dZViewItem
flyingbanana Posted January 24, 2007 Report Posted January 24, 2007 lol, just put the reserve 'RIDICULOUSLY' high!!! so in effect, yes!. This new engine IS my new project that i was looking for! How do you change things, my friend is a bit of an eBay numbnuts and listed a very rare and valuable classic bike without a reserve, he's now shitting himself in case it doesn't reach what it's really worth (estimated at £6000 or £7000, for a 125 !) Can he add a reserve now someone has bid? http://cgi.ebay.co.uk/RARE-CLASSIC-HOND ... dZViewItem get him to log on then edit details of the item...if it dont allow him to change then cancel all bids then cancel the listing and rede do the listing
Admin Vista Posted January 24, 2007 Admin Report Posted January 24, 2007 why dont u bid on it vista thought about that, but it'd look a bit suspect the owner and bidder living in the same small town.
sambo Posted January 24, 2007 Author Report Posted January 24, 2007 What he said mate. Just get someone else to bid on it.
Admin Vista Posted January 24, 2007 Admin Report Posted January 24, 2007 lol, just put the reserve 'RIDICULOUSLY' high!!! so in effect, yes!. This new engine IS my new project that i was looking for! How do you change things, my friend is a bit of an eBay numbnuts and listed a very rare and valuable classic bike without a reserve, he's now shitting himself in case it doesn't reach what it's really worth (estimated at £6000 or £7000, for a 125 !) Can he add a reserve now someone has bid? http://cgi.ebay.co.uk/RARE-CLASSIC-HOND ... dZViewItem get him to log on then edit details of the item...if it dont allow him to change then cancel all bids then cancel the listing and rede do the listing Probably the way to go, I'll tell him to leave it until a few hours before auction end though, see if bidding takes off P.S. Sorry for thread hijack, look forward to seeing the Cossied mk1 and fingers crossed the engines a goodun.
flyingbanana Posted January 24, 2007 Report Posted January 24, 2007 you can not change or cancel listing when there is less than 12hrs remaining
Admin Vista Posted January 24, 2007 Admin Report Posted January 24, 2007 you can not change or cancel listing when there is less than 12hrs remaining Thanks for the warning
4parajon Posted January 25, 2007 Report Posted January 25, 2007 Good luck with the engine mate, hope it works for you.....literally As for your mate Vista, I'd just withdraw the sale and explain to the bidder(s) why, at the end of the day what's gonna happen???, if he gets bad feedback he can just re register, the bloody scammers do it all the time don't they.
Admin Mk2Jo Posted January 25, 2007 Admin Report Posted January 25, 2007 Nice one mate ...... looking forward to seeing this
sambo Posted January 25, 2007 Author Report Posted January 25, 2007 Cheers guys, just got to get hold of an exhaust manifold for it, does anyone know where i can get one??
Guest MK1gaz Posted January 25, 2007 Report Posted January 25, 2007 Go on the atmo yb's , i've got an old manifold for one if you like , cheap as well £60 buys it .
sambo Posted January 25, 2007 Author Report Posted January 25, 2007 Go on the atmo yb's , i've got an old manifold for one if you like , cheap as well £60 buys it . Hey Gaz, cheers for the offer on the ex manifold dude. Will more than likely take you up on that one. I have a little problem though that you or someone can help me with ... I took the cam cover off today ( i know nothing about YB's yet alone N/A ones) and the cams have the origi nalford logo stamped in them??? surely thats not good cos the guy said that they are Kent ones. I guess they could be re-ground? Is that a popular option when going N/A? Also what am i looking for follower-wise? thay look like big round things? I guess i'm just worried that this may be a std cossie turbo head bolted to a 205 block? in which case the engine will be poo?!? Are there any other signs i can look out for to see if this conversion has been done right? Cheers all, Sam.
quickrack Posted January 25, 2007 Report Posted January 25, 2007 Cant help just wanted to say Good Luck!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now