deltamal Posted March 2, 2015 Report Posted March 2, 2015 Had the Cortina on the rolling road today, before the custom exhaust was fitted it made 160 at the wheels, now makes 171.5! pleased with that it's running a tweaked Cologne 2.9 V6 12 valve engine from a Mk3 Granada. 5
Admin Vista Posted March 2, 2015 Admin Report Posted March 2, 2015 Good numbers Malcolm, they were way down on that as standard weren't they?
SmokeEm Posted March 2, 2015 Report Posted March 2, 2015 At the wheels! You gotta be happy with that.
deltamal Posted March 2, 2015 Author Report Posted March 2, 2015 The exhaust was a longlife one, it served a purpose, the guy who made the custom one knows his stuff! I'm upgrading the induction so will have it checked again when it's finished though very pleased with the results so far it goes like poo off a shovel!
brettp Posted March 3, 2015 Report Posted March 3, 2015 2.9 seem very popular at the moment they was always way better than the 2.8s
Danish Posted March 3, 2015 Report Posted March 3, 2015 Yup, I had a 2.8 for a while and I looked at the siamese 3-2 exhaust ports and just wondered "what!?" Good power levels Mal, you are setting the Mk3 Cortina bar *fairly high*
turnover Posted March 3, 2015 Report Posted March 3, 2015 Good power that Malc,any nos going on this one
deltamal Posted March 4, 2015 Author Report Posted March 4, 2015 I looked at the V6 engine choices when I took the YB out, the Essex has the fiber gear driving the cam the same as the 2.8 which as said is short of a few ports! didn't fancy the 24 valve as some of my mates have had problems with oil leaks from the cam covers, whereas the 2.9 12 valve has all it's ports, a timing chain and no oil leaks! no nos going on it as it won't be drag raced! I like tweaking and modding engines to get the most from them without using a turbo or supercharger....
Danish Posted March 5, 2015 Report Posted March 5, 2015 I looked at the V6 engine choices ... the 2.9 12 valve has all it's ports, a timing chain and no oil leaks! I've forwarded this to my Sierra-owning friend - she has a Sierra XR4x4 with the same engine and this should inspire her to squeeze a little more out of it.
deltamal Posted March 17, 2015 Author Report Posted March 17, 2015 On the rolling road again today after the induction mods, it made 186 at the wheels happy with that figure so just a bit of under bonnet tidying to finish the job! 1
luckyjim Posted March 18, 2015 Report Posted March 18, 2015 wow another 14.5 bhp from an induction change. what did you actually change? it must have been strangling it before the mods,excellent now though.
deltamal Posted March 18, 2015 Author Report Posted March 18, 2015 wow another 14.5 bhp from an induction change. what did you actually change? it must have been strangling it before the mods,excellent now though. It's been fitted Jenvy triple 40 DCNF throttle body's on a Rick Wood manifold, the standard BHP was 150, it gained around 10 brake with the engine mods, 11 from the exhaust and 15 from the induction, sounds good as well! 2
SmokeEm Posted March 19, 2015 Report Posted March 19, 2015 The std 150 figure Malcy was at the flywheel so prob only 125ish a t the wheels so 186 is a massive increase! 1
deltamal Posted March 19, 2015 Author Report Posted March 19, 2015 The std 150 figure Malcy was at the flywheel so prob only 125ish a t the wheels so 186 is a massive increase! Probably around 210 at the flywheel, loads of torque as well! on that score the engine mods increased it by around 30 bhp.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now