Jump to content

Recommended Posts

Posted

Had the Cortina on the rolling road today, before the custom exhaust was fitted it made 160 at the wheels, now makes 171.5! pleased with that  :thumbsup:  it's running a tweaked Cologne 2.9 V6 12 valve engine from a Mk3 Granada.

  • Like 5
Posted

The exhaust was a longlife one, it served a purpose, the guy who made the custom one knows his stuff! I'm upgrading the induction so will have it checked again when it's finished though very pleased with the results so far  8)  it goes like poo off a shovel!

Posted

Yup, I had a 2.8 for a while and I looked at the siamese 3-2 exhaust ports and just wondered "what!?" 

 

Good power levels Mal, you are setting the Mk3 Cortina bar *fairly high*  :(

Posted

I looked at the V6 engine choices when I took the YB out, the Essex has the fiber gear driving the cam the same as the 2.8 which as said is short of a few ports! didn't fancy the 24 valve as some of my mates have had problems with oil leaks from the cam covers, whereas the 2.9 12 valve has all it's ports, a timing chain and no oil leaks! no nos going on it as it won't be drag raced! I like tweaking and modding engines to get the most from them without using a turbo or supercharger....

Posted

I looked at the V6 engine choices ... the 2.9 12 valve has all it's ports, a timing chain and no oil leaks! 

 

I've forwarded this to my Sierra-owning friend - she has a Sierra XR4x4 with the same engine and this should inspire her to squeeze a little more out of it.

  • 2 weeks later...
Posted

On the rolling road again today after the induction mods, it made 186 at the wheels  :thumbsup:  happy with that figure so just a bit of under bonnet tidying to finish the job!

  • Like 1
Posted

wow another 14.5 bhp from an induction change. what did you actually change? it must have been strangling it before the mods,excellent now though. :thumbsup:

 

 

It's been fitted Jenvy triple 40 DCNF throttle body's on a Rick Wood manifold, the standard BHP was 150, it gained around 10 brake with the engine mods, 11 from the exhaust and 15 from the induction, sounds good as well!

  • Like 2
Posted

The std 150 figure Malcy was at the flywheel so prob only 125ish a t the wheels so 186 is a massive increase!

 

Probably around 210 at the flywheel, loads of torque as well! on that score the engine mods increased it by around 30 bhp.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...