mattycoops43 Posted June 26, 2015 Report Posted June 26, 2015 Hi guys. I am fitting a 1.8 silvertop zetec into a westfield that belongs to a friend of mine. I just have a question about the water temp senders. There are two on the thermostat housing, but they are to run into the ecu so the signal is not an on off on either one. I need to know if anyone has found a standard type fan switch sender unit that will bolt into either of the holes. (one is 10mm and one is 17mm but the pitch is a bit odd, so we can't measure it with our gauges) The 10mm one is variable resistance so we hope to use it for the gauge on the westfield, but the 17mm one is useless, has such a tiny resistance we can't use it as a switch. Just wondering if anyone has done this conversion and hit upon a simple solution? Thanks Matt We have solved most of the issues doing this conversion, so if anyone needs info from me, feel free to ask. We went with Nodiz system for stand alone ecu and are running twin weber 40dcoe's.
katana Posted June 26, 2015 Report Posted June 26, 2015 Probably easier to cut an adapter into the top hose - that's what I did. Or weld an adapter into the rad if its alloy?
mattycoops43 Posted June 26, 2015 Author Report Posted June 26, 2015 Yes, but if I am doing that I can just get an adapter that will screw a temp switch into the hole thats in the housing. I just think there must be a switch that fits the hole already. Tbh, I looked on evil bay and most of the ford temp switches LOOK like they are all the same large thread, so there's a good chance they will all fit the same, be nice to know if anyone had done it though.
mk1del Posted June 26, 2015 Report Posted June 26, 2015 Ring gbs sports cars in Nottinghamshire, they do these all the time, have look at their website, Richard who runs it very helpful guy
mattycoops43 Posted June 26, 2015 Author Report Posted June 26, 2015 Ring gbs sports cars in Nottinghamshire, they do these all the time, have look at their website, Richard who runs it very helpful guy Thanks, I'll have a look.
colr6 Posted June 26, 2015 Report Posted June 26, 2015 Second mk1dels comments on gbs always very helpful give them a ring or if close by pop in. Were very willing to show me modifications and how they got over problems during there builds
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now