Jump to content

Recommended Posts

  • Moderator
Posted

There were a small number of Euro RS2000s brought in by Ford Australia in the mind 70s before they decided to built their own flat nosed 2lt Mk2s and later again their own RS2000s based on the same platform. Those Euro Rs2000 have a gear lever much further back than in the Australian cars. So I was just wondering if the extension housing in the Euro RS2000 is the same as that of the Cortina models? The extension housings in our cars is definitely shorter than that of our Cortinas and it permits the gear lever to be in the same spot as every other Escort.

Posted

From memory box is same as cortina/ Granada 4 speed. The Aussie ones been shorter could be a good mod for the MG conversion into a four speed instead of 5, the five speed tailshaft has to be shortened to fit the mg s don't know by how much but your short boxes could be a more suitable alternative without specialist mods be it only a four speed.

  • Moderator
Posted

From memory box is same as cortina/ Granada 4 speed. The Aussie ones been shorter could be a good mod for the MG conversion into a four speed instead of 5, the five speed tailshaft has to be shortened to fit the mg s don't know by how much but your short boxes could be a more suitable alternative without specialist mods be it only a four speed.

 

The boxes are basically fully imported Type Es but they have a shorter extension housing than those in our 2lt Cortinas. The European MK2 RS2000s also seem to have the gear lever placed further back than ours so was wondering if they simply used the Cortina Extension housing for the RS2000 there as well?

 

This question all came about after I bought a replacement gear lever. The plastic ball and socket in the original wore out so bought one of those all metal spherical bearing types from the UK. The stick is fairly straight whereas the original one was slightly bent rearwards and it has put the shift right at the outer limits of your fingertips. When I investigated I found that it would in fact be ideal for a European RS2000 with the lever already 75mm or so further back. I knew this to be the approximate difference between the extension housing in our Escorts and Cortinas so I wondered if the reason for the European RS2000 difference was simply that Ford there used the basic Cortina extension housing while Ford Australia made their own.

 

This does beggar one question though is that if the European Mk2 RS2000 already have the lever 75mm further back, why is there a need to modify them even further back to fit a type 9 gearbox? Or does that only get done with a conventional Escort conversion?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...