Jump to content

Recommended Posts

  • Moderator
Posted

Capri Bilsten struts also usually have the embossed square with Bilstein written inside. You can also tell by a nut at the bottom of the leg holding the insert in and also it should have removable steering arms. There are also three holes for where you may think a disk backing plate would go but on a Bilstein strut they werent tapped as the vented disks that went with the struts were too thick for backing plate so they didnt bother tapping the holes.

Posted

theyre usually quite easy to spot bilsteins unless theyre modified standard capri struts. the billies should have a ribbed rubber dust cover over the shaft behind the spring, and the shaft will be as fat as the strut casing. 

Posted

sounds like you got 2.8 billies then. mine do have a square with bilstein inside it next to the ford badge tho. you should be able to put your fingers through the spring and squeeze it to see if the inserts are fat. or a thin shaft like on the capri or rs2000 inserts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...