chinkamon Posted September 26, 2017 Report Posted September 26, 2017 Been toying with upping the carbs on my cortina now it's running perfectly lol Seen a set of twin su's an I had some on my rover v8 an never had any issues but wandering if it's worth the hassle / cost or not?
colr6 Posted September 26, 2017 Report Posted September 26, 2017 Long time since seen twin su carbs on a pre crossflow, very period. I had a pair of strombergs on one once were quite good only cos they were cheap and couldn't afford webers ! If you want to upgrade, me personally would go for a weber off a GT. Would require minor tweeking to run correct and you never know might even make the old girl more economical aswell. 1
chinkamon Posted September 26, 2017 Author Report Posted September 26, 2017 Yea I thought it'd look a bit different having su's but wasn't sure if it'd be worth the faffing about lol
colr6 Posted September 26, 2017 Report Posted September 26, 2017 Like all twin carb set ups they can be a pain to balance if you don't know how to or have a carb balancer. Plus don't know what the availability of jets and needles are for this type of set up. Unlike the weber majority of tuners will have jets for them or the facility to re- drill them to suit.
chinkamon Posted September 26, 2017 Author Report Posted September 26, 2017 Yea I've heard twin carbs can be awkward!
preacherman Posted September 26, 2017 Report Posted September 26, 2017 You can do alot with a twin choke weber to make it perform. Clean up the plenum under the carb as the casting can be rough. Knife edge the butterflies Chick away the choke piss flaps Change the linkage so both chokes open at the same time All the above will add up to a noticeable difference and you still see precrossflow webers on the bay.
preacherman Posted September 26, 2017 Report Posted September 26, 2017 https://m.ebay.co.uk/itm/ford-Kent-116e-1500-pre-crossflow-twin-carburettor-inlet-manifold-weber-carb-/232500050136?hash=item36221538d8%3Ag%3Ab38AAOSwi~5ZyAf2&_trkparms=pageci%3A0f63431d-a2f5-11e7-bcc5-74dbd180b5e7%7Cparentrq%3Abfc4e95d15e0ac8034d7da97ffff96d2%7Ciid%3A1
colr6 Posted September 26, 2017 Report Posted September 26, 2017 If you read the ad it would indicate it's the manifold for sale, worth checking though. Another thing is that carb is not a pre crossflow one, looks like a DFM. Pre crossflow GTs were fitted with a 28/36 dcd. Not that it matters if it's jetted correctly
preacherman Posted September 26, 2017 Report Posted September 26, 2017 You can buy zetec manifolds to take 2 x SU carbs , modern meets old in a funny sort of way. The ebay listing as i mentioned is for carb and manifold and its not a precrossflow weber as you correctly pointed out. More like a dgv but still a great carb.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now