how do i??

[steve mk2]

take the rear window out of my car.

 

do i lay in their and push it out with my feet carefully?

 

 

wanna start taking vinal off the roof tomoz.

 

 

thanks

[flyingbanana]

thats how i did mine...with some one holding it the other side..dont push to hard and do a little bit at a time

[steve mk2]

sweet i thought thats how its done cheers mate

[orionmojo]

yeah, but dont forget to take out the chrome strips first, i know it might sound stupid, but hey it might save your window.

 

also, someone told me to pour boiling water over the rubber first before i took a wndscreen out before, i did it, but i dont know if it made a difference

[john_3.0s]

Yeah hot water will help to save the seal and warm up the sealer, but to be honest your better off replacing it anyway when u take them out. Just make sure u dont use anything to prise it out, I know its tempting but u'll crack the screen (been there done that lol) and take your time as there will be some sort of adhesive / sealant in there that needs to be un-stuck.

 

Good luck m8

[steve mk2]

Yeah hot water will help to save the seal and warm up the sealer, but to be honest your better off replacing it anyway when u take them out. Just make sure u dont use anything to prise it out, I know its tempting but u'll crack the screen (been there done that lol) and take your time as there will be some sort of adhesive / sealant in there that needs to be un-stuck.

 

Good luck m8

 

 

 

yes i have two new rubbers front and back

[arch]

1 of u has to be in the car pushin it out gently with a lil bit of preasure an the other has to eas the rubber out over the seem with a flat head screedriver or sumthing like tht but u myt break it getin it back in hope this helps

[Rick]

if you got new rubbers just cut the old ones out.

[tazrocks88]

if you got new rubbers just cut the old ones out.

exacltly what i was gonna say!!!

[steve mk2]

done i just poured boiling water on the rubbers and pushed it out with my feet