Jump to content

Recommended Posts

Posted

i had a thought....

 

im gonna be fitting a line lock that works off a fancy momentary button in my escort soon and as with msot thigns i wanna keep it looking standard....

 

mossy said i should put the button in the ash try and it got me thinking :?

 

would it work if i removed the ash tray and inserted a metal plate 1/2 the width of the ash tray in place and put on ym switch then cutting up an ash tray so i had the face of it and fitting it back up so i still had the look of the tray, the swivel of teh tray but inseatd of a palce to put ya fag it was just a covering for my hidden switch :?

 

or am i been a complete twat :lol: and thinking silly ideas :lol:

Posted

yeah stick the fag lighter nob on the end of your switch

 

you can line lock your brakes when you park it up too so any thieves will have to drive with brakes on :D

Posted
yeah stick the fag lighter nob on the end of your switch

 

you can line lock your brakes when you park it up too so any thieves will have to drive with brakes on :D

 

in on about putting it in where the ash tray should be and using a cut up ash tray as a door to hide it :wink:

 

plus its on a momentary swicth so as soon as i let go of the button the brakes come off :wink:

Posted

Something like that would work fine. On my old capri it had push button start and it was the fag lighter end on the switch. Well concealed out of the way.

Posted

my mate cisco23 did it with his leccy fan and his other switches...bit of thin wood made to the shape of the ashtry with pre-drilled holes and switches...Wire it all up and drill one large hole in the back of the ashtray feed wires through, connect to switches fit in plywood close ashtray...Job Done!

Posted
my mate cisco23 did it with his leccy fan and his other switches...bit of thin wood made to the shape of the ashtry with pre-drilled holes and switches...Wire it all up and drill one large hole in the back of the ashtray feed wires through, connect to switches fit in plywood close ashtray...Job Done!

 

 

sounds complicated :? can you get me any pics? :wink:

Posted

just get a thin peice of plywood...and keep trimming it till it fits in the ashtray

 

add switches to wood

 

drill hole in rear of ashtray for wiring

 

feed wires through hole

 

connect to switches

 

fit wood in tray....close tray

 

smile in the fact nobody knows they are there!

Posted

Right I've been thumbing my way through MoT manual,Yes line locks ARE part of an MoT.

They're part of hand operated brake valves,They need to be in good working order,lever or control move freely from open to closed,securely fastend and not leaking.

They also need to fitted where they can be easily to reach.

Posted

How about something like this?

 

front.jpg

 

Use your donor ashtray to give you the front.

 

Fit a panel behind with the switch

 

Use a couple of appropriate hinges to give you the drop-down front. Make sure they have sufficient clearnce so thet the front doesn't snag as it drops down. Something like this.................. hinge.jpg

 

You might get a donor hinges from one of those plastic boxes that hold reference cards.

 

For the catch at the top you can get a push close thing, like those fancy Brabantia bins (They are actually available as spares.)

 

catch.jpg

 

A bit of carefully applied araldite and there you go. Should cost you less than a tenner :thumbsup:

Posted
tony petrol guy did it in his 100e :lol::lol::lol:

:ykt::wink::lol:

antz it will be very easy and you could do this in a swiveling astray but of coarse you will only be able to move the astray open and closed one way!!!

Posted

i was about to say....

 

you could do it so when you open the ashtray it turns it on

 

that could be disaterous though if a passenger opend it while on the road :roll: need a kill switch somewhere under the dashstick it under the edge of your seat

Posted
Very 007 :thumbsup:

 

On a similar note. I've got a pedal next to my brake that, if I press down, leaves an oil slick behind the car :D

 

:lol::lol::lol:

Posted
On a similar note. I've got a pedal next to my brake that, if I press down, leaves an oil slick behind the car

 

Must be a special order one then, mine turns the windscreen wipers on :lol:

Posted
tony petrol guy did it in his 100e :lol::lol::lol:

:ykt::wink::lol:

antz it will be very easy and you could do this in a swiveling astray but of coarse you will only be able to move the astray open and closed one way!!!

 

it only slides open if you press the elft side anyway :? im thinking of using the face of an ashtry to keep the swivel movement and hiding the switch behind it...then again a drop down one does sound good..if nto mroe complex :?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...