Hunter T Posted September 30, 2008 Report Posted September 30, 2008 I am trying to decide what to go for and have looked at lots of threads but still cant decide... Looking for Value Maintenance Noise Which suits what application ie track, drag etc Installation Fun Practicality on the road And any other ideas or comments... OK SIMPLE POLL TO SEE WHAT THE OSF USE AND PREFER...
5hane Posted September 30, 2008 Report Posted September 30, 2008 TRANX or a copy of the original diff, thts what im going for (plte) or you have the ATB wht quife have.. OR just have a 'mig spec' diff
MightySprocket Posted September 30, 2008 Report Posted September 30, 2008 micro-dots used to be good but the trip lasted toooo long
antz Posted September 30, 2008 Report Posted September 30, 2008 i have a plate type diff. it definately works very well! noise isnt bad. its just like having a tiny bit of a diff whine. the only thing i found with them is they clunk at slow cornering speeds (parking etc) as the plates grip and let go.
DAZZA Posted September 30, 2008 Report Posted September 30, 2008 micro-dots used to be good but the trip lasted toooo long .....seriously though, id be interested in these responses. Im on the lookout too.
andypipe Posted September 30, 2008 Report Posted September 30, 2008 Value: All about the same cost Maintenance: Defintley Quaife ATB Noise: ATB Quiet, Plate type nosier Which suits what application ie track, drag etc: Road-ATB, Track-Plate, Drag-Locked/welded Installation: All need to be installed and set up by someone who knows what they are doing Fun: All Practicality on the road: ATB
kevmk2 Posted September 30, 2008 Report Posted September 30, 2008 I would say plate type diff, mine doesnt make any noises and hasnt had to be looked at in the 5 years its been in the car
andypipe Posted September 30, 2008 Report Posted September 30, 2008 Andy, What needs setting up? Backlash on the CWP and crush washers
Hunter T Posted September 30, 2008 Author Report Posted September 30, 2008 Andy, What needs setting up? Backlash on the CWP and crush washers Am I right in thinking the ATB does not require setup???
kevmk2 Posted September 30, 2008 Report Posted September 30, 2008 I always get Ron at HT's to set mine up, always work a treat
kevmk2 Posted September 30, 2008 Report Posted September 30, 2008 Andy, What needs setting up? Backlash on the CWP and crush washers Am I right in thinking the ATB does not require setup??? It still needs fitting properly, for backlash etc
andypipe Posted September 30, 2008 Report Posted September 30, 2008 The backlash is the tolerance between the CWP and needs setting regardless of what diff you install
Toby Posted September 30, 2008 Report Posted September 30, 2008 My brand new Tran-X diff is very "vocal" in slow corners / parking. Drives very nicely though. It kind of creaks and clicks as the plates stick-slip-stick-slip over one another. My original plate type (the type burton sell - sailbury??) slipper didn't make any noises. The advantage with the Tran-X is you can run the fattest shaft - if strength is an issue. You will now be told "ATB's are so gentle on shafts you wont break standard ones" on this point I cannot comment! If you lift a wheel with an ATB they unlock - you will now be told "if your car is set up correctly you wont lift wheels" Sup chew soyur muny
SmokeEm Posted September 30, 2008 Report Posted September 30, 2008 Wayne at WPE is also an expert on LSD setting up mate. Give him a call, he'll be only too pleased to advise
countrybumpkin Posted September 30, 2008 Report Posted September 30, 2008 i would go with a atb diff as there nice and quite and have gradual incrase in lock so never snatch up unexpectidly and they act like a standard diff when your just driving normal
mk1super Posted September 30, 2008 Report Posted September 30, 2008 i would go with a atb diff as there nice and quite and have gradual incrase in lock so never snatch up unexpectidly and they act like a standard diff when your just driving normal Thats what iam after but want it to go sideways on demand, and be able to do burnouts/donuts.
turboterror Posted September 30, 2008 Report Posted September 30, 2008 For a road car/trackday car then an ATB. For a drag car then a locker/spool . For a rally car then a plate LSD .
Baz. Posted September 30, 2008 Report Posted September 30, 2008 For a road car/trackday car then an ATB.For a drag car then a locker/spool . For a rally car then a plate LSD . Spot on, good advise
countrybumpkin Posted September 30, 2008 Report Posted September 30, 2008 For a road car/trackday car then an ATB.For a drag car then a locker/spool . For a rally car then a plate LSD . yep i'll agree with that
aden Posted September 30, 2008 Report Posted September 30, 2008 if you have a bit of mechanical mindedness, then you can fit an atb yourself, i fitted mine and over a year later i (touching nearest wooden object!) havent had any problems
5hane Posted September 30, 2008 Report Posted September 30, 2008 sorry to go off topic.. a bit whats a spool ?
kevmk2 Posted September 30, 2008 Report Posted September 30, 2008 Just like a welded diff really, its a one piece unit like this http://www.oldskoolford.co.uk/phpBB2/vi ... hp?t=71182
5hane Posted September 30, 2008 Report Posted September 30, 2008 ahh right.. so an expencive mig spec
Hunter T Posted September 30, 2008 Author Report Posted September 30, 2008 Cool... all good info guys thanks Iv seen ATBs for £425 at the moment and Tran X plate type for £525... Think il be goin for the quaife which will be good for what I want it for...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now