Admin Mk2Jo Posted June 30, 2010 Admin Report Posted June 30, 2010 Following my fuel leak from a perished pipe at the local meet last night and the emergency repair courtesy of Do One Del , I have decided it is probably best to change the whole lot and go for braided .... so, how much do I need to buy to replace the fuel line on my RS and also is there more than one diameter option? Sorry for the thicky girlie question CheeRS guys Also, where is the best place to get it from please?
SmokeEm Posted June 30, 2010 Report Posted June 30, 2010 I would've thought this would do the trick? http://cgi.ebay.co.uk/6mm-1-4-x-5-METRE ... 2a0617086d
Admin Vista Posted June 30, 2010 Admin Report Posted June 30, 2010 I think some types of braided hose can give problems with smells when used for petrol Jo Teflon braided ptfe fuel hose is what I'd go for. 8mm inside diameter
Pipster007 Posted June 30, 2010 Report Posted June 30, 2010 I just used a roll of copper pipe in my old Escort from B&Q. The only place you need rubber pipe is for connecting it to the carb and tank http://www.diy.com/diy/jsp/bq/nav.jsp?a ... earch=true
kevmk2 Posted June 30, 2010 Report Posted June 30, 2010 -6 Teflon hose from Think automotive will do the job. But you cannot use jubilee clips with this type of hose. You will have to use -6 alloy or steel fittings throughout. Your best bet would probably be just new rubber hose
Admin Mk2Jo Posted June 30, 2010 Author Admin Report Posted June 30, 2010 CheeRS for the info guys ... some varying options there, thanks
bomber1 Posted June 30, 2010 Report Posted June 30, 2010 jo when ifitted the pinto in mine i re routed the fuel pipe up the chassis rail on the n/s to keep heat away from the fuel pipe. maybee worth doing if replacing the whole lot
PIG Posted June 30, 2010 Report Posted June 30, 2010 think automotive for anything briaded as kev said jo.give them a call they really are very helpful and quick
rallyesport04 Posted June 30, 2010 Report Posted June 30, 2010 jo when ifitted the pinto in mine i re routed the fuel pipe up the chassis rail on the n/s to keep heat away from the fuel pipe. maybee worth doing if replacing the whole lot its already mounted that side on a RS
deltamal Posted June 30, 2010 Report Posted June 30, 2010 Deffo teflon lined, I had the normal braided hose at first, used to stink the garage out! got through into the house as well, lots of complaints! as said, Think automotive veryhelpfull
KJ 1320 Posted June 30, 2010 Report Posted June 30, 2010 I think you should do what Pip suggested Jo copper pipe P-clipped to the chassis then rubber hose each end
emu Posted June 30, 2010 Report Posted June 30, 2010 I've got copper pipe like Pip suggested for my feed and return lines. Plumbcenter was about half the price of B&Q when I did mine
turnover Posted June 30, 2010 Report Posted June 30, 2010 as Kev said Jo ,cheepest way and get it from your local motor factors,or just use the rubber hose like they use from new if you dont want any joins,will last you years if re newed
robert 1600E Posted June 30, 2010 Report Posted June 30, 2010 as said above Think automotive thats we get all are pipe and fittings from as my son works there
Admin Mk2Jo Posted July 1, 2010 Author Admin Report Posted July 1, 2010 @ OHC CheeRS again guys for the info
bomber1 Posted July 1, 2010 Report Posted July 1, 2010 jo when ifitted the pinto in mine i re routed the fuel pipe up the chassis rail on the n/s to keep heat away from the fuel pipe. maybee worth doing if replacing the whole lot its already mounted that side on a RS not on jo's car it aint it runs up the o/s next to the exshaust
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now