Mk1 escort Hazard loom multi block connector and dash Light shroud

[Jerrytom161]

Hi guys , 

i am looking to sort out a seperate  hazard loom for my Mk1 Escort Mexico . The problem i have is the 2 plastic multi plug shrouds have started to melt at sometime in their life so i am looking to replace them if possible , so if anyone has these in good condition  or even the ones off an old loom or indicator stalk i would be grateful for any help . Also i need the dash light shroud for the hazards that fits into the dash. If anyone can help me on that one too i would very much appreciate it . 

Cheers .

Dave.

[colr6]

Have you tried any of the kit car loom suppliers for the plugs ? I know you can get the looms to match the Sierra column switches an the like so a possibility you may be able to get one through those channels. Any numbers on the blocks? That you can do a search on. I know you would like to keep original but a replacement male / female block may be your only alternative.

[Ray]

9 hours ago, colr6 said:

Have you tried any of the kit car loom suppliers for the plugs ? I know you can get the looms to match the Sierra column switches an the like so a possibility you may be able to get one through those channels. Any numbers on the blocks? That you can do a search on. I know you would like to keep original but a replacement male / female block may be your only alternative.

we call repro CRAPREPRO or BURTONNESOFSHIT Colin, as it is always just that, CRAP & SHIT, I think Dave really wants original ford tbh, that's why hes asked here, which really means a used part, I think hes hoping you modders would have thrown something in the corner after fitting powered steering or a better ignition switch or similar scenario

[Jerrytom161]

Cheers Ray ! .. spot on , ?.

thanks for replying tho colin . 

[colr6]

I only suggested it as I have seen OE plugs on some of the looms. I wouldn't have suggested it otherwise knowing what Dave and yourself are like. Yes I have also seen the crappo on them aswell.

[caprimk1v4]

No problem, I have new Genuine Ford Hazard looms & switches for MK1 Escort & Capri MK1 (similar but different pins on the plugs).

[Ray]

1 hour ago, colr6 said:

I only suggested it as I have seen OE plugs on some of the looms. I wouldn't have suggested it otherwise knowing what Dave and yourself are like. Yes I have also seen the crappo on them aswell.

didn't mean to offend Colin, sorry if that came across wrong

[colr6]

15 minutes ago, Ray said:

didn't mean to offend Colin, sorry if that came across wrong

Don't worry Ray I wasn't offended, you have your veiws which I can appreciate with the standard you want to achieve as does Dave. Can't agree more on some parts. I'll cancel the hit squad !.....lol

[Jerrytom161]

1 hour ago, colr6 said:

Don't worry Ray I wasn't offended, you have your veiws which I can appreciate with the standard you want to achieve as does Dave. Can't agree more on some parts. I'll cancel the hit squad !.....lol

Thanks colin , as you can see i have been offered A nos loom and bezel by caprimk1v4. 

[colr6]

2 minutes ago, Jerrytom161 said:

Thanks colin , as you can see i have been offered A nos loom and bezel by caprimk1v4. 

Result then ! ??

[Jerrytom161]

7 minutes ago, colr6 said:

Result then ! ??

Maybe , i would rather repair my existing one tbh . It would be a lot cheaper i think !!!! 

[colr6]

8 minutes ago, Jerrytom161 said:

Maybe , i would rather repair my existing one tbh . It would be a lot cheaper i think !!!! 

If you'd let me know at the NEC what you wanted could of got you one off that old E we had on our stand, beckoning strip me strip me !!! There was a good few reasonable parts on it.......lol

[Ray]

5 minutes ago, colr6 said:

If you'd let me know at the NEC what you wanted could of got you one off that old E we had on our stand, beckoning strip me strip me !!! There was a good few reasonable parts on it.......lol

i see you didn't offer him the old junk off your Tina though Colin, I mean it must be similar

[Jerrytom161]

Lol. 

[colr6]

13 minutes ago, Ray said:

i see you didn't offer him the old junk off your Tina though Colin, I mean it must be similar

Unfortunately the wiring on the Tina came from autosparks del Col using brass soldered bullets and rubber connectors which I believe the escort had moved to inferior plastic connector blocks and moulded bullets. Hence the problems you have with the more modern escort.

[Jerrytom161]

Dont talk about Auto sharks , have unfortunately experienced their loom on my escort , am on the lookout for a good original complete engine bay loom to replace the one i bought from them . 

[colr6]

12 minutes ago, Jerrytom161 said:

Dont talk about Auto sharks , have unfortunately experienced their loom on my escort , am on the lookout for a good original complete engine bay loom to replace the one i bought from them . 

The loom was made by me Dave, the old fashioned way !

[Jerrytom161]

7 hours ago, colr6 said:

The loom was made by me Dave, the old fashioned way !

I know mate ........... just the word “ Autosparks “ ......... ahhhhh. ?

[Ray]

19 hours ago, colr6 said:

The loom was made by me Dave, the old fashioned way !

twisted together wires, chock blocks and insulation tape then Colin

[colr6]

Would have put the chalk in but it effects my eyes.

[Jerrytom161]

Just to let you know i am still looking for both of those multi plug connector blocks in the photos . If anyone can help i would be very grateful . So any information to the whereabouts  even off other ford models would be a help and i can change my search .

many thanks .

regards .

Dave 

[Stu3y]

Hi Dave, hope all is well.

 

Is the one your selling on eBay the one that is partly melted. I havent even started my mexico yet and probably wont for a good year or two as i now have a second child that is only 2 days old. Having said that i am sourcing parts as they come up and am looking for all wiring looms so wanted to know if the one on ebay is suitable for my 71 Mexico

 

Regards Stuart

 

Sent from my SM-G950F using Tapatalk

 

 

 

 

[Jerrytom161]

8 hours ago, Stu3y said:

Hi Dave, hope all is well.

 

Is the one your selling on eBay the one that is partly melted. I havent even started my mexico yet and probably wont for a good year or two as i now have a second child that is only 2 days old. Having said that i am sourcing parts as they come up and am looking for all wiring looms so wanted to know if the one on ebay is suitable for my 71 Mexico

 

Regards Stuart

 

Sent from my SM-G950F using Tapatalk

 

 

 

 

No Stuart , 

 the reason i am after the plug and socket is for a good loom i have for my car with the  original ford labels on it . No the loom has not got the plug in top photo that is on another one .  I only sell good condition  , original parts that can actually be used on a car at reasonable starting prices . 

Hope this helps 

David . 

[Stu3y]

No Stuart , 
 the reason i am after the plug and socket is for a good loom i have for my car with the  original ford labels on it . No the loom has not got the plug in top photo that is on another one .  I only sell good condition  , original parts that can actually be used on a car at reasonable starting prices . 
Hope this helps 
David . 

Sorry Dave, I wasnt suggesting you were selling a bad part if that's how it came across. I couldnt see any damage but was just checking as i expect the price will raise quite a bit because you akways list well and as you say sell nice items.

Do you know if the loom will fit my 71 Mexico. Also do you have any others?

Regards

Stuart (from sittingbourne)

Sent from my SM-G950F using Tapatalk

[Jerrytom161]

Stuart , as far as i know ....think  this can be fitted to an under dash loom that has the seperate  multi plug connectors for the indicator stalk as this is where it connects into using the above photo multi plugs . Hope this helps .