Mk2 escort steering rack question

[X flow Eddie]

Hi all. 

After haveing a job fitting my billet rack clamps ( lots of filling to make them fit) it turns out i have got unf rack arms ( mk1 escort?)  Not the M14 metric mk2 arms 🤦‍♂️ My question is is there a track rod end that will fit the unf arms and fit to rs style bilstein front struts or have i got to swop the rack arms to the M14 arms and use "green" track rod ends .

Thanks 😊 

[notenoughtime]

Greens are the ones you need

[X flow Eddie]

I have got a pair but they wont fit the unf arms in the photo cus the green track rod ends are an M14 thread 😔

Edited May 16, 2021 by X flow Eddie

[colr6]

I’ll have a a look, I should have a pair of S/h mk2 metric arms if you want.

[Vista]

Standard mk1 track rod ends required I think. Green ones are for matching the metric thread steering rack from the mk2 to the imperial taper on the steering arms bolted to the struts

[X flow Eddie]

1 hour ago, colr6 said:

I’ll have a a look, I should have a pair of S/h mk2 metric arms if you want.

Thanks there but i have got 2 spare racks that i can rob arms off 👍

[X flow Eddie]

15 minutes ago, Vista said:

Standard mk1 track rod ends required I think. Green ones are for matching the metric thread steering rack from the mk2 to the imperial taper on the steering arms bolted to the struts

Thats what i was hoping!! As the taper in the bolt on RS steering arm is the same be it off a mk1 or mk2 escort . Will get a pair of mk1 rod ends and go from there  me thinks !