caprimk1v4

Hi, Had a very small amount of interest but they were offering peanuts for it, I was even offered a swap for a boat !!??, a fishing trawler, I tell you, there are some real daft people out there. No, it's back in it's secure storage for another year and I will just re- MOT it and advertise it again in 2018, but the price it is worth will also creep up in time as well. Cheers.

Car now put away in storage until May 2018.

BUMP.

I have for sale 3x Ford Type 5 (4 speed) gearboxes (Essex & Cologne v6). All 3 are in A1 running condition, having been removed from vehicles that I have owned over the years so I have used them in running cars. £150.00 each. Collection only as they weigh a fair bit, and are in North Wales. Any questions/photo's please ask. Thanks.

Looking for Escort MK2 standard cars with Crossflow engines, so Sport, Ghia, Gl etc-etc. Needs to be as new as possible/ show cars etc. Nothing on KGF classics at the moment, so hoping someone knows of a suitable car or cars, always fancied a Orange MK2 Sport, but nothing for sale, but only looking for cars that are already restored or mint in the first place. Cash waiting. Thanks. (Nothing Pinto powered, as already have Pinto engine cars).

Not much interest so far, don't want to go EBAY route, as every boy racer and his dog will be asking questions with no intentions of purchasing it. I have done 2 miles in it in the last 5 years, so it needs to run a bit more.

More photo's.

I am changing my scene in classic cars, so my MK1 Capri 3000E is up for sale. It has a genuine 57000 miles and is well known in the MK1 Capri world. £32000.00 In the first instance contact via this web site. Thank you.

MK1 Granada would have a BW35 or a Ford C3, C4 never used on Granada until the MK3 came out. I have a C3 for an Essex V6 & one for a 2.0 Pinto. £50.00 each.

I have a complete tank with the fuel take off part still in it, looking for £45.00 for the tank, but I am in North Wales.

Engine block etc-etc sold 01/05/17

I have for sale a brand new Genuine Ford rear light for the Ford Escort/Capri MK1 N/S. It is complete minus the rubber seal and is mint. Will add picture later on today when I get some time to do so. £170.00 plus post.

For sale a Ford crossflow 1600 711M block with crank, pistons and rods. Standard bore never bored out, water got into one of the cylinders and stuck the rings to the bore on that pot, so needs full overhaul, but looking at the crank journals, they will just need a polish and will go again on fresh bearings. £130.00 no offers.

Hi, I have a spare 1600 GT cylinder head, off a 711M block so flat head not chambered, it is a type 37 casting. Does not have manifolds, just head complete with valves/springs, £100.00, can post at cost.

Very bad year all through, as my old Dad used to say to me, "Don't put off until tomorrow, something you want to do today, there are only so many tomorrow's", I am 55 George Michael was 53, I suppose a light that burns twice as bright, only burns for half as long. Hopefully this will be the end of all the sad stuff. RIP George, I did like your music.

Is it a 1981 box your after, and is it for a 4 cylinder or V6 !!?? Cheers.

A shame about Rick, brought up on "Quo" in the 70,s. Very hard on his family & friend's, never a nice time to lose a loved one at any time, but Christmas eve, bloody hell, a major holiday for most people, and now a permanent reminder for all his clan left behind. Hope Carrie comes through ok, again, brought up on her. Yes, we all celebrate, but for some people, we don't know what pain they are going through. RIP Rick, going to miss ya. xx.

Hi, I have these brand new Genuine Ford, £45.00 per trim + post. I can send you a picture if needed, I also have a brand new set of 4 Genuine Ford one's made from Anodised aluminium, Ford produced these late on, I guess they where cheaper to produce than the polished stainless steel version. Cheers.

Hi, Any 1300 crossflows complete !!, pref GT but non GT if nothing else, also brackets for a centre console and the fixing screws. Cheers.

Looking for a 1300 GT crossflow engine to replace a 1100 in a MK2 Escort. Needs to be 711M block and as complete as poss, does not matter if it needs a full recon. May also consider parts, such as inlet manifold for 1300GT, air filter etc-etc. Thanks.

Thing for me is, etch primers are Hygroscopic, they attract moisture out of the air, and this time of year the air is full of moisture, standard primers also are hygroscopic so unless a sealing top coat is applied you are attracting moisture to sit against your new metal.

I Have a brand new one, but I need an old broken one, as I just need the rear pins from the back, but I would want the whole switch so I can remove what I need. I have been waiting for a used broken one to come up on E Bay, as I don't want to ruin a brand new one so as to rob it of its rear pins. Regards.

Wrexham North Wales.

Yep got a 5J x 13 wheel, don't they also call the "Dart Board" style wheels !!??, hate to think we are looking at different wheels. Regards. F.O.C. but I am in North Wales.

Hi, I have got a few Sport type wheels, but I will have to have a look to make sure they are 5J as the Ghia wheels may well have been 4.5J, will have a look and let you know on here. Regards.